Votes - 4, Average rating: 3.5
(
)
)
|
Photos and specs Sony KLV-27HR3 |
Other manuals for this model:
Televisions - KLV-27HR3 (4.12 mb)
Televisions - KLV-27HR3 (3.74 mb)
Televisions - KLV-27HR3 (2.63 mb)
manual abstract
Next, press V or V to select the desired option and press OK. Finally, read below how to operate into each option. B_ft -S/33 © © © © © © © © © © © © o o o o J> # GB POWER SAVING This option allows you to reduce the power consumption of this TV. To do this: After selecting the option, press OK. Then, press V or V to select Reduce. Next, press OK to store. AUTO FORMAT This option allows you to automatically change the aspect ratio of the screen. To do this: After selecting the option, press OK. Then, press V or V to select On (if you wish the TV set to automatically switch the screen format according to the broadcast signal) or Off (if you wish to keep your preference). Finally, press OK to store. Even if you have selected “On" or “Off", you can always modify the format of the screen by pressing {0 repeatedly on the remote control to select one of the following formats: SMART: Imitation of wide screen effect for 4:3 broadcast. 4/3: Conventional 4:3 picture size, full picture information. 14/9: Compromise between 4:3 and 16:9 picture size. ZOOM: Widescreen format for letterbox movies. WIDE: For 16:9 broadcast. Full picture information. o o OJ ZOO Of In “SMART", “ZOOM” and “14/9" modes, parts of the top and bottom of the screen are cut off. Press V or V to adjust the position of the image on the screen (e.g. to read subtitles). According to the format of diffussion, black bands can always appear whatever the selected mode. continued... TV Functions 121 AV2 OUTPUT The "AV2 Ouptut" option allows you to select the source to be output from the Scart connector Gs*-2/ -© so that you can record from this Scart the signal coming from the TV or the signal that is being viewed on the TV. If your VCR or DVD recorder supports SmartLink, this procedure is not necessary. To do this: Once you have entered into the "Features" menu as it is explained in the previous page and after selecting the option, press OK. Then press V or V to select the desired output signal: TV to output the aerial source. AUTO to output the signal that is being viewed on the TV. ■raa • If you select “AUTO", the output signal will always be the same one that is displayed on the screen. • If you have connected a decoder to the Scart (3*2/ -SS 2 or to a VCR connected to this Scart, please remember to change back the "AV2 Output" to “TV" for correct unscrambling. Alternatively, set the "Decoder" option in the "Manual Programme Preset" menu to "On" for the scrambled programme. For more details refer to page 26. TV SPEAKERS This option allows you to turn off the TV speakers e.g. to listen to the sound through external audio equipment connected to the TV. To do this: Press the V or V buttons to select one of the following options, then press the OK button. On The sound is output from the TV speakers. One Time Off The TV speakers are temporarily turned off allowing you to listen to the sound from external audio equipment. The "TV Speakers" option automatically returns to "On" when the TV set is switched off. Permanent Off The TV speakers are permanently turned off allowing you to listen to the sound from external audio equipment. To turn on the TV speakers again, change the "TV Speakers" option to "On". RGB CENTER This option is only available if an RGB source has been connected to the Scart connector GM/^3 on the rear of TV. When viewing an RGB signal, the picture may need some adjusting. This option allows you to adjust the horizontal picture position so that the picture is in the middle of the screen. To do this: Once you have entered the "Features" menu as it is explained in on page 21 and while watching an RGB source select the “RGB Center" option and press OK. Then press B or b to adjust the centre of the picture between -5 and +5. Finally press OK to confirm and store. 221 TV Functions The Set Up Menu Picture Adjustment &] Mi Æ Select: HIS SetOOEl End: SD Picture Mode Personal Contrast 80- Brightness 50-- Colour 50 -r^^— Sharpness 50--- Backlight 70- Reset Noise Reduction Auto Colour Tone Normal m The “Set Up" menu allows you to alter various options on this TV. To do this: Press the MENU button and press V three times to select , then press OK to enter this menu. Next, press V or V to select the desired option and press OK. Finally, read below how to operate into each option. Set 0 P Language English Æ <№A Country United Kingdom Auto Tuning Programme Sorting Manual Programme Preset Select Set roEl Back ffl End: MMEE0 LANGUAGE This option allows you to select the language that menus are displayed in. To do this: After selecting the option, press OK and then proceed in the same way as in step 3 of the section "Switching On the TV and Automatically Tuning" on page 15. © © © oooo - O O COUNTRY This option allows you to select the country in which you wish to operate the TV set. To do this: After selecting the option, press OK and then proceed in the same way as in ...
Other models in this manual:Televisions - KLV-23HR3 (4.59 mb)