Votes - 1, Average rating: 5
(
)
)
|
manual abstract
Using the Digital Favourite list r\AR........................................... .12 .14 .16 GB Using Optional Equipment Connecting optional equipment...................... Viewing pictures from connected equipment Using HDMI control....................................... .17 .18 .19 Using MENU Functions Navigating through menus. Picture Adjustment menu... Sound Adjustment menu.... Features menu................... Set-up menu....................... Digital Set-up menu r\/3 .. .20 .21 .23 .25 .27 .30 Additional Information Specifications.... Troubleshooting .32 .34 DJ3 : for digital channels only 3 GB Start-up Guide 1: Checking the accessories Remote RM-ED009 (1) Size AA batteries (R6 type) (2) Stand (1) Screws for stand (3) Screws for stand (4) (KDL-40P30xx, KDL-37P30xx, KDL-40U30xx, KDL-37U30xx) To insert batteries into the remote Push and lift the cover to open. • Observe the correct polarity when inserting batteries. • Do not use different types of batteries together or mix old and new batteries. • Dispose of batteries in an environmentally friendly way. Certain regions may regulate disposal of batteries. Please consult your local authority. • Handle the remote with care. Do not drop or step on it, or spill liquid of any kind onto it. • Do not place the remote in a location near a heat source, a place subject to direct sunlight, or a damp room. 2: Attaching the stand 1 Open the carton box and take out the stand. 2 Release the protection bag and take out the TV set. 4 GB 3 Place the TV set on the stand. Take care not to interfere with cables. 4 Take out the screws from the accessory bag. KDL-32P30xx KDL-26P30xx KDL-32U30xx KDL-26U30xx KDL-26S30xx KDL-26S28xx KDL-26T28xx KDL-26T26xx screws. KDL-40P30xx KDL-37P30xx KDL-40U30xx KDL-37U30xx KDL-32P30xx KDL-26P30xx KDL-32U30xx KDL-26U30xx KDL-26S30xx KDL-26S28xx KDL-26T28xx KDL-26T26xx 3: Connecting an aerial/ VCR/ DVD recorder Connecting an aerial/ VCR/ DVD recorder If using an electric screwdriver, set the tightening torque at approximately 2 N-m (20 kgf-cm) Continued 5 GB Start-up Guide 4: Preventing the TV 6: Selecting the language, from toppling over country/region and location 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand. 2 Install a machine screw (M5 x 12, not supplied) into the screw hole of the TV. 3 Tie the wood screw and the machine screw with a strong cord. 5: Bundling the cables 1 Connect the TV to your mains socket (220-240V AC, 50Hz). 2 Press 1 on the TV (top side). When you switch on the TV for the first time, the Language menu appears on the screen. 3 Press F/f to select the language displayed on the menu screens, then press ©. Auto Start Up Language Country Location Français Italiano Deutsch EXXnviKÙ Türkçe Español Portugués Polski Select: ♦ + Confirm: -f- 6 GB 4 Press F/f to select the country/region in which you will operate the TV, then press ©. Auto Start Up Language Country United Kingdom Location Ireland Nederland Belgi3/Belgique Luxembourg France Italia Schweiz/Su isse/Svizzera Deutschland Back: * Select * ♦ Confirm: -f If the country/region in which you want to use the TV does not appear in the list, select “-” instead of a country/region. 5 Press F/f to select the location type in which you will operate the TV, then press ©. Auto Start Up Language Country Location Home Shop Back: * Select: ♦ ♦ Confirm: -f This option selects the initial picture mode appropiate for the typical lighting condition in these enviroments. 7: Auto-tuning the TV 1 Before you start auto-tuning the TV, insert a pre-recorded tape into the VCR connected to the Tv (page 4) and start play back. The video channel will be located and stored on the TV during auto-tuning. If no VCR is connected to the TV, skip this step. 2 Press ©. If a message appears for you to confirm the aerial connection No digital or analogue channels were found. Check all the aerial connections and press © to start auto-tuning again. 3 When the Programme Sorting menu appears on the screen, follow the steps of “Programme Sorting” (page 27). If you do not change the order in which the analogue channels are stored on the TV, go to step 4. 4 Press MENU to exit. The TV has now tuned in all the available channels. When a digital broadcast channel cannot be received, or when selecting a region in which there are no digital broadcasts in step 4 (page 7), the time must be set after performing step 4. Detaching the TableTop Stand from the TV Do not remove the Table-Top Stand for any reason other than to wall-mount the TV. KDL-40P30xx KDL-37P30xx KDL-40U30xx KDL-37U30xx KDL-32P30xx KDL-26P30xx KDL-32U30xx KDL-26U30xx KDL-26S30xx KDL-26S28xx KDL-26T28xx KDL-26T26xx Auto Tuning Do you want to start automatic tuning? Back: *• Start: -t- Cancel: menu The TV starts searching for all available digital channels...
Other models in this manual:Televisions - KDL-26S28xx (11.52 mb)
Televisions - KDL-26S30xx (11.52 mb)
Televisions - KDL-26T26xx (11.52 mb)
Televisions - KDL-26T28xx (11.52 mb)