Votes - 1, Average rating: 4
(
)
)
|
manual abstract
SLEEP timer Using the SLEEP button allows you to have the appliance automatically turned off after a preset time (the time range will be as long as 120 minutes) , and set the appliance to standby mode. At every press of the button the setting time will be decreased by 30 minutes. When the remaining time is 5 minutes left, it will be displayed once every 2 minutes for 4 seconds SLEEP OFF SLEEP 120 SLEEP 30 Press SLEEP Press SLEEP Press SLEEP When the SLEEP timer is functioning, if you press SLEEP button again, the TV will display the remaining time. If the power is switched off, the SLEEP timer will be cancelled. You must set it again if wanted. 4. TV/AV selection Press the TV/AV button on the set or AV button on the remote controller to select TV or AV mode. When the TV is working at RF receiving mode, press AV button the set will be switched to AV1, the screen displays AV1 and colour system; Press the button again and the set will be switched to AV2, the screen displays AV2 and colour system. Press the button once more, the set will be switched to TV mode and the screen displays current TV channel. 14 12 AUTO Press AV Press AV After 4 seconds AV1 AUTO AV2 AUTO 12 AUTO Press AV Press AV After 4 seconds AV1 AUTO AV2 AUTO Press AV Note: S-VHS IN and AV2 use the same interface. If you want to receive signals input through S-VHS terminal, switch the set to AV2, the S-VHS (S-VIDEO) input terminal has priority over the AV2 VIDEO terminal; To use equipment connected to the AV2 VIDEO IN terminal, disconnect any plug from the S-VHS terminal. S-VHS and AV2 use the same group of AUDIO IN terminals. 1) When receiving broadcasting TV program (the TV signals are input through aerial terminal), press the AV button to switch the set to TV mode. 2) When receiving programs played back by Video DISC, VCR, Satellite receiver, VCD (the signals are input through AV terminals), please set the receiver to corresponding Video mode (AV1 or AV2). * In video mode, the sound system button and the PRESET menu in the main menu have no function. 15 External equipment connection This set is incorporated with Audio & Video input and output terminals which allows direct connection to external equipments (such as VCR, Video DISC, VCD, Satellite Receiver etc.) for playing back and recording the programs. 1. Video playback If your video equipment has a S-VHS output terminal, connect it to the S-VHS input terminal (special S-VIDEO type) of the set and connect audio line to AV2 AUDIO IN terminal. If not, connect it to the VIDEO terminal (photo type). 1.1 According to the following figure connect the TV set to the VIDEO equipment. To audio outputsTo video outputsTo audio outputsTo S-VHSoutput terminal Note: The VIDEO equipment may be VCR, VCD or Satellite Receiver. 1.2 Press the "AV/TV" on the set or "AV" button on the remote controller, let the TV set work at the corresponding video mode, the screen displays "AV1" or "AV2" and corresponding colour system. The picture displayed on the screen is the program played back by the video equipment. 16 2. Recording 2.1 According to the following figure connect the TV set to the VCR. (Y) YELLOW (VIDEO) (W) WHITE (AUDIO, L/MONO) (R) (AUDIO, R) 2.2 When recording, set the TV on the desired channel, the program recorded is the program displayed on the screen. 17 Troubleshooting Symptoms Check the following items The set cannot be turned on, red indicator is off . Be sure the power cord is plugged in or the AC socket is damaged. Poor colour, poor tint . Contrast, colour, tint are not correctly adjusted. Spots appear on the screen . Possible interferences of automobiles, motorcycle, trolley bus, neon lamps, etc. Stripes appear on the screen . Possible interferences of electronic interference from another TV set, a computer, electronics game machine, a broadcast station, etc. Double images or "ghosts" . . This may be caused by reflections from nearby mountains or buildings. Check the antenna direction. Snowy picture . . It is possible that the aerial "lead - in" is damaged or has come off. Check the antenna direction. Colour or sound is abnormal . The TV system's setting may be wrong, change the colour or sound system. The remote controller does not work . . The batteries may be worn out. The batteries may be installed with their polarity reversed. TV cabinet creaks . . Even if the picture or sound is normal, changes in the room temperature sometimes makes the TV cabinet expand or contract, making a noise. This does not indicate a malfunction. 18 Specifications Power supply: Receiving channel: TV system: Dimension(mm): Weight: CRT: Power consumption: Antenna impedance: Sound output: Accessories: AC 240V, 50Hz VHFL 0~5, 5A; VHFH 6~11; UHF E21-E69 PAL-B/G, PAL-60, NTSC 3.58 /4.43 (AV) 720 (W) x 510.5 (H) x 452 (D) 35kg 61cm Diagonal, blackstripe picture tube 120W 75 ohm 4W x 2 one remote controller Note : Design and specifications are subject to change without notice. 19 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVEN...