Votes - 7, Average rating: 3.7
(
)
)
|
Photos and specs Hyundai H-LCD1502 |
manual abstract
7. 9. 10. 11. 12. 13. 14. 15. 16. MUTE button. Press to mute or restore the TV sound. POWER button. Press to turn the TV on or off (standby). Number buttons. Press to enter a channel number. Q.VIEW button. Press to switch to last program you just watch. AV/TV button. Press to display the signal source selection menu. DISPLAY button. Press to display status such as zoom, signal source, time and so on. SLEEP button. Press to select a time period after which the TV will turn itself off. PROG+ button. Press to select memorized TV programs. VOL- button. Press to adjust the volume. MENU button. Press to display main menu or confirm selection. PROG- button. Press to select memorized TV programs. VOL+ button. Press to adjust the volume. P.P. button. Press to select a different picture effect. S.M button. Press to select a different sound effect. FAV. button. Press to select favorite program one by one. ZOOM button. Press to select the aspect ratio. 8 General operations Turning ON/OFF 1. Plug the end of the power cord into an appropriate wall outlet and connect the antenna cable or CATV cable. 2. Turn on the TV. Switch on the POWER button on the front panel of TV to connect AC power. When the power of the TV is connected, the power indicator lights up in red, the TV is in standby mode, press the POWER button on the RC or front panel to switch the set to normal operation mode. 3. Turn off the TV. Press the POWER button on the RC or front panel to switch the set to standby mode. Switch off the power switch on the front panel of TV to cut AC power. Note: Unplug the set from the AC outlet when it is not to be used for a long period of time. 4. Select the TV channel or adjust the TV sound. Press PROG+/- buttons on the RC to select memorized TV programs (press VOL+/- buttons to adjust the volume). Press PROGRAM UP/DOWN buttons on the front panel to select memorized TV programs (press VOLUME UP/DOWN buttons to adjust the volume). Press the number buttons to enter a program number directly, after a while, the set will turn to the program automatically. Button functions P.P. 1. Press the P.P button on the RC to display the current picture state. 2. Press the P.P button repeatedly to select different picture effect. 3. The on-screen display will disappear in 3 seconds if you stop adjusting. Note: You can select Standard, Bright, Personal or Soft. SLEEP 1. Press the SLEEP button on the RC to display the sleep time. 2. Press the SLEEP button repeatedly to select a time period after which the TV will turn itself off. 3. The on-screen display will disappear in 3 seconds if you stop adjusting. Note: You can select 0 (off), 5, 10, 15, 20, 25, 30, 45, 60, 90, or 120 minutes. In the last minute of the sleep time, the words “POWER OFF” will display at the top left corner of the screen. You can press any button to cancel the setting at this time. 5.M 1. Press the S.M button on the RC to display the current sound state. 2. Press the S.M. button repeatedly to select different sound effect. 3. The on-screen display will disappear in 3 seconds if you stop adjusting. Note: You can select News, Theater, Odeum, Personal. AV/TV 1. Press the AV/TV button on the RC to display the signal source selection menu. 2. Press the PROGRAM UP/DOWN button to select your desired signal source. 3. Press the VOLUME UP button to confirm your selection. 4. The on-screen display will disappear in 15 seconds if you stop adjusting. ZOOM (could be different base on different model) 1. Press the ZOOM button on the RC to display the current zoom mode. 2. Press the ZOOM button repeatedly to select your desired picture zoom effect. 3. The on-screen display will disappear in 3 seconds if you stop adjusting. Note: You can select 16:9 or 4:3. 9 FAV Press the FAV. button on the RC repeatedly, it will select FAV. channel in cycle. Q.VIEW Press Q.VIEW button on the RC will switch to last program or source you just watch. 10 OSD operations Menu Operation 1. Press MENU button to display the main menu. 2. Press VOLUME UP/DOWN (VOL+/-) buttons to enter the needed menu. 3. Press PROGRAM DOWN (PROG-) button to highlight the desired menu/item. 4. Press VOLUME UP/DOWN (VOL+/-) buttons to adjust the setting. 5. Press MENU button to save setting and go back to last menu. 6. Press MENU button to exit the menu. Note: The buttons on the front panel have the same functions as the corresponding RC buttons. PICTURE MENU Enter Picture menu. You can adjust following parameters: brightness, contrast (to adjust the difference between the light and dark areas of the picture), saturation (to adjust the richness of the color), sharpness, hue, color tone, backlight (to adjust the level of back light, depending on room lighting), picture mode (to adjust the brightness, contrast, saturation and sharpness of the picture simultaneously). Notes: Saturation and sharpness are not available in PC mode. Hue is only available in NTSC mod...