Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
Confirm Press CH or CH to select the minute to begin recording. 6 Press VOL+. Press CH or CH to select the minute to end recording. Press VOL+ to lock in the minute. Timer Record (1) 05/01/2002 Wed 05:30pm Channel : 11 Time : 06:30pm v 07: 30 MO/DAY : 05/01/2002 Wed Speed : SLP Select : One Time Clear :REC Cancel Move oev Sel. Confirm Press CH or CH to select the hour to end recording. . The TV/VCR automatically selects AM or PM for the ending time. Timer Record (1) 05/01/2002 Wed 05:30pm Channel : 11 Time : 06:30pm v 07:30 MO/DAY : 05/01/2002 Wed Speed : SLP Select : One Time Clear :REC Cancel Move oev Sel. Confirm CHAPTER FOUR: VCR OPERATION VCR OPERATION Using Advanced Features, continued 8 Press CH to select 10 Press VOL+. “MO/DAY. ” Press VOL+. Timer Record (1) 05/01/2002 Wed 05:30pm Channel : 11 Time : 06:30pm v 07:30 MO/DAY : 05/01/2002 Wed Speed : SLP Select : One Time Clear :REC Cancel Move oev Sel. Confirm Press CH or CH to select the month to begin recording. 9 Press VOL+. Pse CH or CH to select the year to begin recording. Press VOL+ to lock in the year. ” 11Press CH to select “Speed”. Timer Record (1) 05/01/2002 Wed 05:30pm Channel : 11 Time : 06:30pm v 07:30 MO/DAY : 05/01/ 2002 Wed Speed : SLP Select : One Time Clear :REC Cancel Move oev Sel. Confirm Press CH or CH to select the day to begin recording. Timer Record (1) 05/01/2002 Wed 05:30pm Channel : 11 Time : 06:30pm v 07:30 MO/DAY : 05/ 01/2002 Wed Speed : SLP Select : One Time Clear :REC Cancel Move oev Sel. Confirm Press VOL+ and CH or CH to select the speed at which you want to record. Timer Record (1) 05/01/2002 Wed 05:30pm Channel : 11 Time : 06:30pm v 07:30 MO/DAY : 05/01/2002 Wed Speed : SLP Select : One Time Clear :REC Cancel Move oev Sel. Confirm 12 Press CH to select “Select”. Press VOL+ Timer Record (1) 05/01/2002 Wed 05:30pm Channel : 11 Time : 06:30pm v 07:30 MO/DAY : 05/01/2002 Wed Speed : SLP Select : One Time Clear :REC Cancel Move oev Sel. Confirm Press CH to select the “One Time”, or “Weekly”, “Daily”. 13 Press MENU to exit the menu. . If you enter two program times that overlap, a program overlap warning appears on the TV screen, along with instructions for fixing the overlap. . The REC indicator on the front panel of the TV/VCR is lit when program times are stored. 14 Press POWER to turn off the TV/VCR. Important • The TV/VCR should be off to record the programs you’ve chosen. But, if you are recording a channel that comes through a cable box, be sure to leave the cable box on and tuned to the channel you want to record. • During timer recording, there is no picture on the screen because the power is off. If you want to watch the channel while it’s being recorded, press POWER on the remote control. • One-time timer programs clear from memory after recording. Daily and weekly programs remain in the timer until you remove them. If power to the TV/VCR is interrupted, all programs will be disabled until you reset the clock. Then, the programs will be restored. 28 CHAPTER FOUR: VCR OPERATION VCR OPERATION Using Advanced Features, continued Using Program Review Program Review allows you to review all of the programmed recordings currently stored in the TV/VCR’s memory and to remove a programmed recording quickly and easily. 1 Press MENU to display the menu. 2 Press CH until “VCR Setup” is selected. Press VOL+. Menu Picture Time Set Setup VCR Setup Caption V-chip Move oev Sel. Exit 3 Press CH until “Program Review” is selected. Press VOL+. VCR Setup Timer Record Program Review True Repeat : Off Block Repeat : 1 Move oev Sel. Menu The information for the first program appears on the screen. . Program Review is only available if you have programmed your TV/VCR to record at a later time. 4 To see the information for the program number, press VOL+. Program Revies Date Start End CH 1. 5/01 6:30pm v 7:30 24 2. 5/02 6:30pm v 7:30 11 3. -/-- -:--am v -:-- -4. -/-- -:--am v -:-- -5. -/-- -:--am v -:-- -6. -/-- -:--am v -:-- -Clear : REC Canel Move v Adj. Menu . If you’re recording through a cable box, the Program Review screen displays the output channel of the cable box as the channel number to be recorded. 5 If you want to remove a program from memory, press CLEAR when the program you want to erase appears on the screen. That program is erased from memory. The TV/VCR is equipped with a program memory backup that saves all the timer program information if the power to the TV/VCR is interrupted. If the unit has been without power, all of the timer program information will be disabled, until you reset the clock. When the clock is reset, the programs will be restored. 6 Press MENU to exit the menu. CHAPTER FOUR: VCR OPERATION CHAPTER FIVE SPECIAL FEATURES Using True Repeat Using Block Repeat You can set your TV/VCR to automatically repeat a tape or a section of tape. When you use True Repeat, your TV/VCR will play until it reaches the end of a tape. Then, it will rewind to the beginning of the tape and begin...
Other models in this manual:Televisions - CMC19410 (1.36 mb)