Login:
Votes - 4, Average rating: 3.3 ( )

User manual Chauvet, model BLACKLIGHT F-40

Manafacture: Chauvet
File size: 44.64 kb
File name: blacklight48-234.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


Works Under blacklight only. Great for entrance of clubs BLACK SHADOW 400 watt Blacklight. 80ft. x 60ft. coverage. chiIvet. m-AinsniriHi ■ ftrfsnwnw Blacklight F-40 Users Guide Please read these instructions carefully before use World-wide Headquarters: 3000 North 29th Ct„ Hollywood, Florida, USA, FL 33020 Tel: +1-954-929-1115 Fax: +1-954-929-5560 European Office: Unit 18, Hunslet Trading Estate, Leeds, UK LS10 1BL Tel: +44(0)113-276-0755 Fax: +44(0)113-277-6675 At the Rear: Housing Fig. 1 Introduction Congratulations on the purchase of your new CHAU VET lighting effect. We are confident you will enjoy many trouble free hours with this unit. To assist with the care and use of the product we have prepared this short guide. Operation This lighting effect has been designed to function on a mains power supply of either 120V~60Hz or 230V~50Hz and has been fitted with a suitable power plug for use with this voltage. Check the label on the unit and the power plug for the correct voltage. Before beginning operation refer to section on Installing/Replacing Bulbs. Connect to the mains power supply and switch on. The unit should illuminate casting an ultra - violet glow. Installing/Replacing Bulbs 1. Disconnect from main power supply before attempting to install/replace lamp. 2. Ensure that the unit is sufficiently cool, before removing blown lamps. In order to install the lamp, disconnect from main power supply first. Gently twist flourescent bulb counterclockwise to remove (fig. 11 Replace bulb. Only use the appropriately rated bulb as use of any other lamp may cause the unit to be non-operational. Finally, before using, check that the bulb is housed correctly. Cleaning The most important part of your lighting effect to keep clean is the bulb as this allows the light output to transmit. This should be cleaned with a soft damp cloth. The body of the unit may also be cleaned in the same way. We recommend internal cleaning be carried out by a fully qualified technician. Troubleshooting • If the unit is not functional - check main power supply is ‘on’. • If the bulb does illuminate - shipping may cause bulb to loosen. Tighten bulb. If the unit is functional but lamp does not light - lamp may require replacing. If after trying this solution you still have a problem contact your dealer or CHAUVET. Maintenance & Servicing Work on internal parts should be carried out by a qualified technician. Removal of any covers is considered a breach of warranty and will not be covered under any such agreement unless authorized first by the company. No user serviceable parts, please refer to CHAU VET for sen/ice. Power Connections The unit is supplied with a power plug appropriate to its voltage and destination. Should any other connections be required they must be carried out with the following configuration. Earth = Green/Yellow cable Neutral = Blue cable Live = Brown cable In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection. In the UK, it is required that all mains plugs are fitted with 5A fuses. Technical Specifications Power 120V~60Hz 230V~50Hz Lamps_Part No. F40BLB_Part No. F40BLB Dimensions 1321mm x 51mm x 5 I mm / 52in x 2in x 2in Weight 1.6kg 3.5lbs User Information (Please complete for your records) Date Purchased: / / Serial No: Dealer Stamp: Model: F-40 48" BLACKLIGHT...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category