l Do not overload the dryer. Overcrowding causes uneven drying and wrinkling, and can cause items to wear out faster (because of pilling). l Mix large items with smaller items. l You may need to rearrange large items (sheets, blankets, tablecloths) during a cycle to reduce balling or rolling up. l Reduce wrinkling of permanent press and synthetics by drying smaller loads and removing items from the dryer as soon as tumbling stops. l For better tumbling action when drying only a few small items,

These settings are approximate as they do not take into account variations in load. NOTE: Fans closest to the headers should not be cycled on standard temperature or pressure controls. Dramatic temperature and pressure changes at the headers as a result of fan action can result in possible tube failure. Fan motors are designed for continuous duty operation. Fan cycling controls should be adjusted to maintain a minimum of five (5) minutes on and five (5) minutes off. Short cycling of fans may res

You have purchased a quality, world-class home appliance. Years of engineering experience have gone into its manufacturing. Use this Use and Care Guide to safely and efficiently operate and maintain your appliance. Complete and mail the Ownership Registration Card provided with your appliance. This will help us notify you about any new information on your appliance. Your safety is important to us. This guide contains safety symbols and statements. Please pay special attention to these symbols an

Always • To clean the exterior, simply wipe over with turn the power off and remove the plug a dampened cloth and wipe dry before cleaning • Do not immerse the hairdryer in water or any other liquid Help Line If you have any additional questions about using the 1600W Pistol Style Dryer, please call the Sunbeam help line in Australia on 1800 025 059. In New Zealand, please call 09 912 0747 ‘Sunbeam’, is a registered trademark of Sunbeam Corporation. Made in China. Due to minor changes in design o