Votes - 5, Average rating: 3.8
(
)
)
|
manual abstract
• DryGuy™ Wide-Body™ has a polarized plug (one blade is wider than the other) as required by Underwriters Laboratories. To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. Helpful Tips: Helpful Tips: . OPERATING INSTRUCTIONS 1.) Plug the DryGuy™ Wide-Body™ into any standard 120 Volt 60 Hz electrical outlet. 2.) The DryGuy™ Wide-Body™ dries two pair of Ski boots at once or ski boots and ski gloves all together or snowboard boots and gloves simultaneously and all other types of shoes: hiking, golf, basketball, soccer, and all other cleated and athletic shoes simultaneously. The DryGuy™ Wide-Body™ dries Children’s shoes and mittens effortlessly as well. 3.) Carefully slide footwear, ski boots, or gloves onto drying nozzles being careful not to restrict air flow at the bottom or block air flow into the blower assembly. 4.) Place ski boots on drying nozzles with buckles facing away from one another. 5.) Select the heat or no heat setting by pressing the rocker switch at the bottom of the motor housing. 6.) Turn timer knob clockwise to the 180 minute mark to initially activate the timer, then turn knob counter-clockwise back to desired drying time. 1.) When placing gloves or mittens or children’s boots and shoes onto the drying nozzles be sure not to pinch air circulation. 2.) We recommend all footwear be dried after every use to help prevent bacteria and fungus growth; the primary cause of odor. 3.) Smaller footwear and garments will dry quicker than larger items. 4.) Your energy efficient DryGuy™ Wide-Body™ heats to a gentle temperature of around 100° Fahrenheit and uses “Forced Air” technology to quietly and quickly dry wet garments, but does not generate a forceful air stream that could possibly damage sensitive garments. At first you may suspect the unit is not operating properly. We recommend you place the back of your hand near the drying nozzles so you will better feel the gently warmed air stream. Operation Time: • 1 to 3 hours – avoid over-drying! • Drying time varies depending upon extent of moisture, temperature and humidity and size of footwear and garments • We normally recommend a minimum of one hour drying time every time your boots are used. • While in operation, the unit although relatively quiet, produces minimal noise. This is a normal condition and does not indicate a problem. Maintenance: Use only mild soap and a damp cloth to clean the DryGuy™ Wide-Body™. Never let any liquid get inside the motor; never immerse any part of the motor into liquid. The power to dry in an hour, warm in minutes. P.O Box 1102 Mercer Island, WA 98040-1102 IMPORTANT: To assure product SAFETY and RELIABILITY, repairs and maintenance (other than those listed in this manual) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts. Lubrication: DryGuy™ products are properly lubricated at the factory and are ready for use. CAUTION: The use of any accessory or attachment not recommended may be hazardous and may void warranty. Out of Warranty Service Information: DryGuyTM Service Center is staffed with trained personnel to provide customers with efficient and reliable product service. If you need repair, or genuine factory replacement parts, for “Out of Warranty” product contact; Eric Ferguson/ Electric Innovations at the DryGuyT service center at: electricinnovations@roadrunner.com Full One-Year Use Warranty: DryGuy™ (U.S.) warrants this product for One Year against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways. The first, which will result in exchanges, only, is to return the product to the retailer from whom it was purchased (provided the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns. The second option is to take or send the product (prepaid) to a DryGuy™ authorized Service Center for repair or replacement at our option. Proof of purchase, store name, and date of purchase may be required. This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which very from state to state. Should you have any questions, contact the service center. This product is not intended for commercial use. The following will not be Covered Under Warranty: - Any modification to DryGuy™ Wide-Body™. - Product has be misused or improperly cared for. - Products over 1 year from date of original purchase. - Warranty request without original receipt. - Repairs done by anyone other than DryGuy...