Votes - 2, Average rating: 3.5 ( )

Manafacture: Fisher-Price File size: 1.25 mb File name: Language of manual:

• From the front of the assembly, place the pad onto the seat. • Lift the bottom of the pad. Insert the two elastic loops on the pad through the holes in the seat bottom. • From the back and bottom of the seat, hook the elastic loops to the tabs on the seat. 15 Wheels Front Base Holes Back Base Holes Hole Wheels Wheel Peg Bottom View Pad Hole Hole Elastic Loops 16 Tabs Elastic Loops Back and Bottom View Hint: To remove the wheels from the front and back base, simply pull and remove. Store the wheels in a safe place for future use. • Insert the crotch belt through the slot in the pad.Make sure the crotch belt is not twisted. • Fold the top of the pad down. • Remove the shoulder portion of the waist/shoulder belts by feeding them through the slots in the seat back. Assembly 9 Crotch Belt Slot Shoulder Portion 17 18 • Lift the top of the pad. • Thread the waist/shoulder belts through the bottom slots in the back of the seat pad. 19 • Fit the top of the pad over the seat back. • Fold the bottom edge of the pad under the edge of the seat bottom to fasten it. • First, insert the shoulder portion of the shoulder/waist belt through the slots in the headrest pad.Then, insert the shoulder portion of the shoulder/waist belt through the slots in the pad and seat back. - Use the lower shoulder belt slots for a smaller baby. - Use the upper shoulder belt slots for a larger baby. Upper Shoulder Belt Slots Lower Shoulder Belt Slots Headrest Shoulder Pad Slots Portion 20 Pad Bottom Slots 10 • At an angle, fit the storage caddy onto the tab on either frame. Assembly is now complete. • Fit the pad strap through the handle and press it to the small fastener on the back of the seat. • Fit the headrest strap through the handle and press it to the large fastener on the back of the seat. Handle Large Fastener Small Fastener Pad Strap Headrest Strap 22 Frame Tab Storage Caddy 24 Back View • Fit the strap on the top of the headrest through the handle. Handle Headrest Pad Strap Assembly 21 • From behind the seat, be sure the shoulder portion of the waist/shoulder belts are secure in the seat back slots. • Hook the elastic loops on each side of the pad onto the tabs in the seat back. Elastic Loop Elastic Loop Tab Tab Belt Ends Back View 23 11 • Place your child in the seat. Position the crotch belt between your child’s legs. • Fasten both waist/shoulder belts to each side of the crotch belt.Make sure you hear a "click" on both sides. • Check to be sure the restraint system is securely attached by pulling it away from your child.The restraint system should remain attached. Crotch Belt Waist/Shoulder Belt IMPORTANT! Before each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed.Never substitute parts. Waist/Shoulder Belt 1 Prevent serious injury or death from falls or sliding out. The child should be secured in the high chair at all times by the restraining system, either in the recline, semi-recline or upright position. The restraint belts must be adjusted to fit your child snugly. The tray is not designed to hold the child in the chair. WARNING Securing Your Child B A B A To tighten the waist belts: • Feed the anchored end of the waist belt up through the buckle to form a loop . • Pull the free end of the waist belt . • Repeat this procedure to tighten the other waist belt. To loosen the waist belts: • Feed the free end of the waist belt up through the buckle to form a loop . • Enlarge the loop by pulling on the end of the loop toward the buckle. • Pull the anchored end of the waist belt to shorten the free end of the waist belt . • Repeat this procedure to loosen the other waist belt. B A B To tighten the shoulder belts: Hold the adjuster and pull the front shoulder strap down. To loosen the shoulder belts: Slide the adjuster down. Note: After adjusting the restraint system to fit your child, make sure you pull on it to be sure it is securely fastened. Buckle A Free End Hold Adjuster Pull Strap Down Slide Adjuster Down 2 3 Anchored End Free End Tighten Loosen Tighten Loosen Anchored End 12 Securing Your Child To change shoulder belt slots: • From the back of the high chair, push the shoulder portion of the waist/shoulder belts through the seat back slots. • From the front of the high chair, pull the shoulder portion of the waist/shoulder belts out and then fit them back through the desired shoulder belt slots in the headrest pad, seat pad and the seat back. Pull on the belts to be sure they are secure in the seat back. Shoulder Portion 4 5 • Fit the base tray onto the seat armrests. Push down until the base tray "snaps" into place. Base Tray Armrest Armrest 6 Prevent serious injury or death from falls or sliding out. The child should be secured in the high chair at all times by the restraining system, either in the recline, semi-recline or upright position. The restraint belts ...

Download now

Please, enter two numbers from picture: