150 pSI mAX AIr preSSure! exceeding this pSI may result in injury/tool damage.. Specifications Air Inlet....................................................1.4" NPT Average Air Consumption ........................ 4 CFM Operating Pressure .................................. 90 PSI Capacity................... 14 oz., (400cc bulk grease) Weight ........................................3.2 lbs. (Empty) Inventory (Figure 1) Qty A.. Grease Gun ............................................... 1 B.. Hydra

We will not accept any item back without this number. Proof of purchase must accompany the merchandise. The manufacturers reserve the right to change specifications at any time because they constantly strive to achieve better quality equipment. We make every effort to ensure that our products meet high quality and durability standards and we hope you never need to use this warranty. Please feel free to write or call us if you have any questions about the machine or the manual. Grizzly Industrial

2. Press the button inside the spring handle finger hole. Figure 5. Guide the spring handle to the front of the gun. DO NOT LET THE SPRING HANDLE SNAP BACK TO ITS RESTING POSITION! 3. Press down on the nail stop and slide the nails out through the nail slot. Figure 6. Spring Handle Button Nail Stop Spring Handle Figure 5 shows a closeup of the spring handle button. Press to release pressure. VII. OPERATIONS C. CONNECTING TO AIR To connect the air hose to the air nozzle at the rear of the gun: 1.

If the stapler does not fire, then the safety yoke mechanism is working correctly. If the stapler does fire when you do this, immediately disconnect the stapler from the air supply and call our customer service for help. Similarly if the stapler fires when the trigger is pulled, without the safety yoke mechanism being depressed, then the stapler is not working properly. If either of these two conditions develop after you have used your stapler for a period of time, check the lubrication of these

TX 3 176 561 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. REVISED MARCH, 1999 PRINTED IN USA DISCONTINUED MACHINE MANUAL DISCLAIMER THE INFORMATION IN THIS MANUAL REPRESENTS THE LAST CONFIGURATION OF THE MACHINE BEFORE IT WAS DISCONTINUED. MACHINE CONFIGURATIONS MAY HAVE CHANGED AS PRODUCT IMPROVEMENTS WERE INCORPORATED. IF YOU OWN AN EARLIER VERSION OF THE MACHINE, THIS MANUAL MAY NOT EXACTLY DEPICT YOUR MACHI

Fastener Length: G1847 ........................................................................................................1.2" to 7.8" Crowned Staples G1852 ........................................................................................................................3.8" to 13.16" Brads G1861 ........................................................................................................................5.8" to 19.16" Brads G3811.............................................

Additional information sources are necessary to realize the full potential of of pneumatic nailers. Trade journals, woodworking magazines, and your local library are good places to start. WARNING! As with all power tools, there is danger associated with pneumatic nailers/staplers. Use the tool with respect and caution to lessen the possibility of mechanical damage or operator injury. If normal safety precautions are overlooked or ignored, injury to the operator or others in the area is likely. Y

This air nailer or stapler must be regularly oiled and operated with treated or clean air. It is a precision tool with close internal tolerances designed for repetitious use. Wet and/or dirty air lowers performance and prematurely destroys internal parts. To ensure that the best quality air enters your nailer: 1. Use an in-line system to automatically oil, filter, and dry compressed air. Grizzly offers an in-line regulator/filter/water-separator/lubricator (G2304). Please refer to our catalog fo

To replace a piston: Always disconnect air from nailer whenever servicing! During maintenance, a nailer connected to air may fire accidentally, causing serious personal injury! 1. Disconnect the nailer from the air supply! 2. Remove all nails from the magazine cartridge. 3. Remove the 4 cap screws from the nailer exhaust cap. 4. Remove the exhaust cap as shown in Figure 7. 5. The top of the piston should now be visible inside the cylinder, which is housed in the head of the nailer. 6. Open the m

This attachment is connected by hoses between the air compressor and the stapler. Using this unit protects your tool from damaging water build-up, allows you to adjust and maintain constant air pressure to your tool, and saves you the inconvenience of having to manually lubricate your tool every time you use it. Check the current Grizzly catalog for availability of this unit. If you plan on installing a filter/lubricator/ regulator unit in your compressed air system, always follow the connection