Login:
Votes - 2, Average rating: 4 ( )

User manual Campbell Hausfeld, model SN328K00

Manafacture: Campbell Hausfeld
File size: 3.07 mb
File name:
Language of manual:enesfr
Free link for this manual available at the bottom of the page



manual abstract


Warning indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Caution indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. Notice indicates important information, that if not followed, may cause damage to equipment. NoTE: Information that requires special attention important Safety instructions iNSTrUCTioNS pErTaiNiNG To a riSK of firE, ElECTriC SHoCK, or iNJUrY To pErSoNS When using tools, basic precautions should always be followed, including the following: Model SN328K00 CaliforNia propoSiTioN 65 This product or its power cord may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. Wear protective gear. Locate model and date code on tool and record below: Model No : _____________________ Date Code: _____________________ Retain these numbers for future reference REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping. Campbell Hausfeld Tools meet or exceed Industries’ Standards as set forth by the American National Standard IN715601AV 6/09 Institute/International Staple, Nail and Tool Association in ANSI/ISANTA SNT-101-2002 © 2009 Campbell Hausfeld/Scott Fetzer For parts, product & service information visit Operating Instructions important Safety instructions (Continued) GENEral a . To reduce the risks of electric shock, fire, and injury to persons, read all the instructions before using the tool. b . Be thoroughly familiar with the controls and the proper use of the equipment Follow all instructions Contact your Campbell Hausfeld representative if you have any questions c . Only persons well acquainted with these rules of safe operation should be allowed to use the unit Read and understand tool labels and manual. Failure to follow warnings, dangers, and cautions could result in DEATH or SERIOUS INJURY. WorK arEa a . Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of electric shock, fire, and injury to persons b . Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The tool is visitors away while operating the tool. Distractions are able to result in the loss of control of the tool pErSoNal SafETY a Stay alert. Watch what you are doing and use common sense non-skid safety shoes and a hard hat must be used for the applicable conditions f Always wear eye protection. g Always wear hearing able to create sparks resulting in the better control of the tool in ignition of the dust or fumes unexpected situations c Keep bystanders, children, and e Use safety equipment. A dust mask, when operating the tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool increases the risk of injury to persons b . Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair increases the risk of injury to persons as a result of being caught in moving parts c . Avoid unintentional starting. Be sure the switch is off before connecting to the air supply. Do not carry the tool with your finger on the switch or connect the tool to th air supply with the switch on d . Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables protection when using the tool. Prolonged exposure to high intensity noise is able to cause hearing loss h . Do not attach the hose or tool to your body. Attach the hose to the structure to reduce the risk of loss of balance if the hose shifts i . Always assume that the tool contains fasteners. Do not point the tool toward yourself or anyone whether it contains fasteners or not j Do not nail on top of another nail. This is able to cause the nail to be deflected and hit someone, or cause the tool to react and result in a risk of injury to persons. k Remove finger from the trigger when not driving fasteners. Never carry the tool with finger on trigger, the tool is able to fire a fastener. Tool Components and Specifications • rEqUirES: 0 4 SCFM with 10 fasteners per minute @ 90 psi • air iNlET: 1/4 inch NPT • STaplE SiZE raNGE: 3/8 inch to 1-1/4 inch • MaGaZiNE CapaCiTY: 100 Staples per load, 18 gauge • WEiGHT: 2 lbs , 15 oz • lENGTH: 10 inch • HEiGHT: 9-1/8 inch • MaXiMUM prESSUrE: 100 psi • prESSUrE raNGE: 60 psi – 100 psi Cap Exhaust Trigger Adjustable Depth Control Magazine Latch ButtonQuick Clear Nose Work Contact Element (WCE) Fastener Loading Area Fastener Discharge Area ...

Other models in this manual:
Nail Guns - IN715601AV (3.07 mb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category