• Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : CI370 High Capacity Washing Machine 7kg 1400 spin Manual for Installation, Use and Maintenance EN 1 WASHING MACHINE INSTRUCTION MANUAL EN 1 EN Contents 1. Precautions for safety and use 2 2. Installation instructions 5 3. Description of controls 8 4. Using the appliance for washing 9 5. Cleaning and maintenance 15 6. Troubleshooting 17 This appliance is tagged in accordance with European

of the recommended amount of detergent in the prewash compartment of the detergent drawer and . of the detergent in the wash compartment. Warning! • If no recommended doses are provided, for delicate items in synthetic fibre use from . to 2/3 of the recommended dose for washing tough cotton fabrics. • Only neutral detergents recommended for wool should be used on the wool programme. • Use the doses recommended by the detergent producer. 4.7 LIQUID DETERGENT DOSES 1. Pour the dose required into t

load of clothes (Kg 1 Normal cold Cold Cotton/Linendelicate colours very light soil YES 2 Quick 30.C 30 Cotton/Linenwhites/coloursvery light soil YES NO YES 3 Normal 30.c 30 Cotton/Linendelicate colours light soil YES 4 Normal 40.C 40 Cotton/Linenfast colours light soil YES 5 (*) Normal 60.C 60 Cotton/Linenfast colours medium soil YES 6 Normal 90.C 90 Cotton/Linenwhites heavy soil YES 7 Prewash 60.C 60 Cotton/Linenwhites/fast coloursheavy soil YES 8 Delicate cold Cold Synthetic/mixcotton delicat

c Liquid detergents may also be used in this washing machine. The level of liquid must never be higher than the MAX mark printed on the dispenser wall. Remember that the amount of detergent to be used will always depend on: The amount of clothes to be washed. How heavily the clothes are soiled. The hardness of the water (Information on water hardness in your area can be obtained from the local authorities). We recommend the use of a decalcifying product if the water hardness is high in your area

From time to time, depending on the hardness of your water, it is recommendable to run a full wash cycle using a decalcifying product. This will extend the life of your washing machine. The washing machine should be disconnected from the mains electricity supply before any cleaning or maintenance is carried out. 1 CLEANING THE DETERGENT DISPENSER 20 Clean the detergent dispenser whenever there is any washing product residue left inside. a Pull outwards on the detergent dispenser to remove it com

15 4 SPIN SPEED SELECTION using the appliance and practical tips SPIN-DRYING The wash options must always be selected after choosing the wash programme. Any programme change during selection cancels the previously selected options. a Spin speed selection and anti-crease button The selected programme has its own particular spin speed. b You can change it by repeatedly pressing the spin button. The spin speed will gradually be reduced at 100 r.p.m. intervals to 400 r.p.m. for display models. On no

Please read all the instructions before using the washing machine. Do not wash items that have previously been cleaned, washed, soaked or treated with petrol, solvents for dry cleaning, other inflammable substances or explosives, as they produce fumes that could catch fire or explode. Do not add petrol, solvents for dry cleaning or other inflammable or explosive substances to the wash water as they produce fumes that could catch fire or explode. Do not repair or replace any part of the washing m

• Harby Road • Langar • Nottinghamshire * NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : IB Contents Page 1 Important information Page 2 Warnings Page 3 Washing machine specifications Page 4 Unpacking the washing machine and removing the transit bolts Page 5 Connecting to the mains water supply Page 6-7 Levelling and electrical information Page 8 Before first use Page 9 Preparing garments for washing Page 10 Detergents and additives Page 11-12 Selecting the was

When installing this product we recommend you seek the help of another individual. IMPORTANT: THIS APPLIANCE IS A CLASS II APPLIANCE (DOUBLE INSULATED) AND IS NOT INTENDED TO BE EARTHED. DO NOT FIT AN EARTH LEAD TO THIS EXTRACTOR. Do not mount the isolation switch behind the chimney section. It is a requirement that you must be able to isolate the extractor from the mains electrical supply after installation. This appliance is intended to be connected to the mains electrical supply by means of a