Votes - 0, Average rating: 0
(
)
)
|
manual abstract
WZ 20400: with pull-out worktop. Platform For easier loading and unloading. The basket contained in the drawer can be used to carry the laundry. Technical data Dimensions (DxWxH) 60 x 60 x 85 cm (height adjustable) Weight approx. 51 kg Max. capacity 8 kg Condensation container 4.0 l Connection voltage 220-240 V Connected load 1000 W Fuse protection 10 A Ambient temperature 5 -35°C Product number Production number Inside of door The rating plate can be found on the back of the dryer. ..Drum interior light (depending on model): The drum lights up after the door is opened and after the programme starts, and switches off automatically. WZ 20410 WZ 20500 Consumption rates Fabrics/programmes Residual moisture in the fabrics after spinning Drying time** Energy consumption** ......Cottons 8 kg ....Cupboard Dry* 1400 rpm (50%) 114 min 1.44 kWh 1000 rpm (60%) 134 min 1.79 kWh 800 rpm (70%) 154 min 2.08 kWh ....Iron Dry* 1400 rpm (50%) 82 min 1.01 kWh 1000 rpm (60%) 102 min 1.33 kWh 800 rpm (70%) 122 min 1.65 kWh ....Easy-Care 3.5 kg ....Cupboard Dry* 800 rpm (40%) 49 min 0.51 kWh 600 rpm (50%) 62 min 0.64 kWh *Test program according to DIN EN 61121. **The values may differ from the those specified depending on the type of fabric, mixture of laundry to be dried, residual moisture in the fabric and loading capacity. Fabrics/programmes Drying time Annual energy consumption ..Cottons 8 kg / 4..kg* ....Cupboard Dry*** 106 min / per cycle 225..kWh / per year *** Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU. 11Normal noises During drying, the compressor and the pump generate some noise which is entirely normal. The compressor in the dryer may occasionally generate a humming noise. The volume and pitch of this may vary depending on the selected programmes and the progress of the drying. The compressor in the dryer is ventilated from time to time, which creates a whirring sound. The automatic cleaning process causes a clicking noise. The process of pumping the condensation into the condensate container generates pumping noises. 12 What to do if ... ..The ....Start/Pause indicator light does not light up. Mains plug plugged in? Programme selected? Check the socket fuse. ..The display panel light and indicator lights (depending on model) go out and the ....Start/Pause indicator light flashes. Energy-saving mode is activated ..see the separate Energy-saving mode instructions. ..The display panel switches off. The appliance goes into the sleep mode after activating ....(Finished in) option ..page 5. ..The ..(Condensate container) indicator light flashes. Empty the condensate container ....page 4. Press the ....Start/Pause button to reset the displayed indication and then press the ....Start/Pause button again to restart the appliance if necessary. ......(Fluff filter) indicator light flashes. Clean the fluff filter ....page 4/8. Press the ....Start/Pause button to reset the displayed indication and then press the ....Start/Pause button again to restart the appliance if necessary. ..SELF CLEANING appears in the display panel. Not an error. Automatic cleaning of the heat exchanger. Do not empty the condensate container. ..Dryer does not start. ....Start/Pause button selected? Door closed? Programme set? ..Programme terminates shortly after starting. Ambient temperature greater than 5°C? Is the appliance loaded with the laundry? Load too small for selected programme?/Use timed programme ..page 6/7. Loaded laundry dry? ..Water is leaking out. Make sure the dryer is level. ..The door opens by itself. Push the door closed until you hear it engage. ..Creasing. Laundry load exceeded? Remove articles of clothing immediately after the end of the programme, hang up and pull into shape. Unsuitable programme selected ..page 7. ..Drying result is not satisfactory (laundry feels too damp). Warm laundry feels damper than it really is. The selected programme does not suit the load. Use another drying programme or, in addition, select the timed programme ..page 7. Use ..(Fine adjust) for the dryness levels ..page 5. Fine layer of limescale on the humidity sensors ..Clean the moisture sensors ..page 8. Programme termination, e.g. tank full, mains power supply failure, door open or maximum drying time reached? ..Drying time too long. Clean the fluff filters under running water ..page 4/8. Insufficient supply of air ..Ensure that air can circulate. Air inlet possibly blocked ..Clear inlet ..page 9. Ambient temperature higher than 35°C ..Ventilate the room. ..One or more indicator lights are flashing. Clean the fluff filter ..page 4,8/12. Check the installation conditions ..page 9. Switch off, allow to cool, switch back on and restart the programme. ..Power failure. Remove the laundry from the dryer immediately and spread out. This allows the heat to dissipate. Be careful as the door, the drum and the laundry may be hot. ..Other intermittent noises and vibrations. Not an error. Normal noises ..page 11. ..L...