Votes - 0, Average rating: 0
(
)
)
|
manual abstract
** The values may differ from those specified, depending on the type of fabric, composition of laundry to be dried, residual moisture in the fabric and the amount of laundry being loaded. 11 What to do if ... Turn the programme selector to Off and remove the mains plug from the socket. . The Start/Pause $ indicator light does not light up. Mains plug plugged in? Programme selected? Check the socket fuse. . The display panel light and indicator lights (depending on model) go out and the Start/ Pause $ indicator light flashes. Energy-saving mode is activated ..see the separate Energy-saving mode instructions. . The display panel switches off. The appliance goes into the sleep mode after activating ....Finished in option ....page 5. . The I (Condensate container) indicator light flashes. Empty the condensate container ....page 4. Press the Start/Pause $ button to reset the displayed indication and then press the Start/Pause $ button again to restart the appliance if necessary. If featured, check the hose for condensation outlet. . ....(Fluff filter/Heat exchanger) indicator light flashes. Clean the fluff filter ..page 4. Press the Start/Pause $ button to reset the displayed indication and then press the Start/Pause $ button again to restart the appliance if necessary. Clean the heat exchanger ..page 8. . Dryer does not start. Start/Pause $ button selected? Door closed? Programme set? After-sales service If you cannot rectify the fault yourself (e.g. switching off/on) a What to do if..., page 11/12, please contact our after-sales service. We will always find an appropriate solution and avoid unnecessary visits by engineers. The contact details of your local after-sales service can be found in the enclosed after-sales service directory. – GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute. A call set-up fee of up to 6 pence may apply.) – IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) Please provide the after-sales service the product number (E no.) and the production number (FD) of the appliance. Product number Production number You can find this information: inside the door* / in the opened service flap* and on the rear of the appliance. *depending on the model Trust the expertise of the manufacturer. Contact us for assistance. In this way, you can rest assured that the repair will be carried out by trained service technicians using original spare parts. 12 What to do if ... ..Programme terminates shortly after starting. Ambient temperature greater than 5°C? Is the appliance loaded with the laundry? Load too small for selected programme?/Use timed programme ....page 6/7. Loaded laundry dry? ..Water is leaking out. Make sure the dryer is level. Clean the heat exchanger seal. ..The door opens by itself. Push the door closed until you hear it engage. ..Creasing. Laundry load exceeded? Remove articles of clothing immediately after the end of the programme, hang up and pull into shape. Unsuitable programme selected ..page 7. ..Drying result is not satisfactory (laundry feels too damp). Warm laundry feels damper than it really is. The selected programme does not suit the load. Use another drying programme or, in addition, select the timed programme ..page 7. Use ..+Fine adjust for the dryness levels ..page 5. Fine layer of limescale on the humidity sensors ..Clean the moisture sensors ....page 8. Programme termination, e.g. tank full, mains power supply failure, door open or maximum drying time reached? ..Drying time too long. Clean the fluff filter under running water ..page 4/11. Insufficient supply of air ..Ensure that air can circulate. Air inlet possibly blocked ..Clear inlet ..page 9. Ambient temperature higher than 35°C ..Ventilate the room. ..One or more indicator lights are flashing. Clean the fluff filter and heat exchanger ..page 4,8/11. Check the installation conditions ..page 9. Switch off, allow to cool, switch back on and restart the programme. ..Power failure. Remove the laundry from the dryer immediately and spread out. This allows the heat to dissipate. Be careful as the door, the drum and the laundry may be hot. 12 What to do if ... ..Programme terminates shortly after starting. Ambient temperature greater than 5°C? Is the appliance loaded with the laundry? Load too small for selected programme?/Use timed programme ....page 6/7. Loaded laundry dry? ..Water is leaking out. Make sure the dryer is level. Clean the heat exchanger seal. ..The door opens by itself. Push the door closed until you hear it engage. ..Creasing. Laundry load exceeded? Remove articles of clothing immediately after the end of the programme, hang up and pull into shape. Unsuitable programme selected ..page 7. ..Drying result is not satisfactory (laundry feels too damp). Warm laundry feels damper than it really is. The selected programme does not suit the load. Use another drying programme or, in addition, select the timed programme ..page 7. Use ..+Fine adjust for the d...