Votes - 0, Average rating: 0
(
)
)
|
manual abstract
There are still enough contents for approx. 3 washes. The same detergent or softener can be topped up at any time. If the product/manufacturer is changed, we recommend cleaning the dispensers beforehand. ~Page 41 If required, adjusting the basic dosage. ~Page 36 Standard settings O If required, change basic dosages for detergent and softener: The basic dosage amount to be set corresponds: For detergents – to the manufacturer’s recommendation for normal soiling and to the particular water hardness. For softeners – to the manufacturer’s recommendation for medium softness and to the particular water hardness. This information can be found on the package label of the detergent/softener or ask the manufacturer directly. To determine the existing water hardness, use a test strip or check with your water utility company. My water hardness: Here is an example of the detergent dosage on a package label: Degree of soiling.. Water hardness.. light normal heavy very heavy soft/medium 55 ml 75 ml 120 ml 160 ml hard/very hard 75 ml 95 ml 150 ml 180 ml . – Factory setting of the basic dosage: for detergent 75 ml and for softener 36 ml. – In the case of more concentrated detergents reduce the basic dosage amount. 34 O If intensive foaming occurs repeatedly during washing, please check the basic dosage setting and dosage strength. Furthermore, some liquid detergents may have a tendency to excessive foaming. If the basic dosage settings and dosage strengths are correct, it is recommended to use a different liquid detergent. Change basic dosage amount. ~Page 38 O If required, convert i-DOS i/w dispenser contents. Instead of softener, a second liquid detergent can also be used in dispenser i-DOS i/w. Change dispenser content. ~Page 38 . – An additional changeable insert for a second detergent is enclosed and can be fitted in the fill cover. – When the i-DOS i/w container content is switched from softener to detergent, the basic dosage amount of detergent for this container is set to the factory setting (75 ml) and the dosage for this detergent is set to off in all permitted programmes. Then select the detergent dosage (light, normal or strong) via the i-DOS i/w button on the display panel. The i-DOS w container is automatically deactivated if the detergent dosage is activated for the i-DOS i/w container. The settings are retained for this programme until the next change. – When thei-DOS i/w container content is switched to softener, the basic dosage amount is set to factory setting (36 ml) and the dosage is set to normal in all permitted programmes. – Switching over the container contents requires an additional acknowledgement via the display panel. i A change to the i-DOS content resets the i-DOS i/w settings to their standard value. Cancel Continue 35 Manual dosage In the case of programmes in which intelligent dosage is not possible or not requested (then set intelligent dosage to off), detergent is added to detergent drawer uv. In addition to intelligent dosage of detergents -cleaning agents such as water softener, bleach or stain remover can also be dosed here. 1. Pull out the detergent drawer. 2. Dosing in dispenser uv according to: – Dosage recommendation on the display panel, e.g. for Cottons: Dosage: 70% u Please load laundry: max. 9kg Depending on the amount of washing in the washing machine, a dosing recommendation is indicated on the display panel. – Soiling. – Water hardness (~Page 34) or ask your water supply company. – Manufacturer’s instructions. . – When dosing all detergents, cleaning aids and cleaning agents, always follow the manufacturer's instructions. – Dilute viscous fabric softener and fabric conditioner with water. Prevents blockage of the overflow! – If detergent is dosed manually, no additional detergent via intelligent dosage (set intelligent dosage to off). It prevents overdosage and foaming. 36 Consumption values Programme Load Energy consumption *** Water *** Programme duration *** 2^ Cottons 20 °C 9 kg 0,32 kWh 64 l h Cottons 40 °C * 9 kg 1,15 kWh 64 l 2_h Cottons 60 °C 9 kg 1,25 kWh 64 l 2_h Cottons 90 °C 9 kg 2,30 kWh 74 l 2^h Easy-Care 40 °C * 4 kg 0,65 kWh 46 l 2 h Mix 40 °C 4 kg 0,59 kWh 44 l 1]h Delicate/Silk 30 °C 2 kg 0,15 kWh 34 l _h Wool 30 °C 2 kg 0,19 kWh 39 l _h * Programme setting for tests according to currently valid European standard EN60456. Information about comparability tests: To test the test programmes, wash indicated load size at maximum spin speed. Programme Additonal function Load Annual energy consumption Annual water consumption Cottons 40/60 °C EcoPerfect ** 9/4,5 kg 189 kWh 11300 l ** Programme setting for testing and energy labelling according to directive 2010/30/EU with cold water (15 °C). *** The values may deviate from the stated values depending on water pressure and hardness, room temperature, type and amount of laundry, detergents used, fluctuations in the mains voltage and selected additional functions. 37 Appliance settings By pressing the...................