Votes - 4, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
¦ Voltage of each terminal in 220-240V~ and DC while applying an electric current. 13 7. TROUBLESHOOTING 7-4.HOW TO KNOW THE WATER LEVEL FREQUENCY Press the Temp. and Spin button simultaneously. ex) 241 : Water level frequency = 241. 10-1kHz =24.1kHz The digits means water level frequency (10-1 kHz) Checking Point None All lamps turn on 1 time Clockwise spin (right) Motor rpm (About 45) 2 times Low speed Spin Motor rpm (About 63~67) 3 times High speed Spin Motor rpm (About 79~85) : WD-80480S/N/T, 80490S/N/T Motor rpm (About 95~106) : WD-10480S/N/T, 10490S/N/T 4 times Inlet valve for pre-wash operation Water level frequency (25~65) 5 times Inlet valve for main-wash operation Water level frequency (25~65) Hot inlet valve in case of hot water fill 6 times Inlet valve for main-wash operation Water level frequency (25~65) 7 times Counterclockwise spin (left) Motor rpm (About 45) 8 times A Heater is in operation for 3 sec. Water Temperature 9 times Draining pump operation Water level frequency 10 times Auto off operation 7-2. QC TEST MODE. . Pressing Option and Time button simultaneously. . Power supply ON with pressing upper two button. . Press the START/PAUSE button as follows. ~Press the START/PAUSE button more 4 times until stop spinning. Pressing number of START/PAUSE button 7-5.ERROR DISPLAY. . If you press the [Start/Pause] button when an error is displayed, any error except S/W ERROR will disappear and the machine will change into pause status. . In case of , , , if the error is not resolved within 20 sec. In the case of other errors, if the error is not resolved within 4 min. power will be turned off automatically and the error code will be blinked. But in case of , power will not be turned off. ERROR SYMPTOM CAUSE 1 WATER INLET ERROR Water has not reached to the pre-set level within 4 min. since inlet valve operated, or water has not reached to the normal level within 25 min. 2 IMBALANCE ERROR The appliance is tilted. Laundry is gathered to one side. Non distributable things are put into the drum. 3 DRAIN ERROR Water has not drained enough within 5 min. 4 OVERFLOW ERROR Water is automatically being pumped out because too much water is in the tub. 5 SENSOR PRESSURE S/W ERROR The sensor pressure switch is out of order. 6 DOOR OPEN ERROR The [Start/Pause] button is pressed with the door open. The door switch is out of order. 7 HEATING ERROR The thermistor is out of order . 14 8. ERROR DIAGNOSIS AND CHECK LIST 8-1.DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION SYMPTOM GUIDE FOR SERVICE CALL NO POWER YES NO Is the power plug connected firmly to 220-240V~ outlet? Power failure? or Breaker opened? Is the outlet controlled by a switch. Visit to check Water inlet trouble YES YES NO YES NO NO Is displayed? Is the tap opened? Is the tap frozen? Is the water supply shut-off? Is filter in the inlet valve clogged with foreign material? Visit to check Clean the filter of inlet valve 15 SYMPTOM GUIDE FOR SERVICE CALL DOOR OPEN ERROR Refer to 7-3 ERROR DISPLAY N...
Other models in this manual:Washers - WD-10480N (1.7 mb)
Washers - WD-10480NV (1.7 mb)
Washers - WD-10480S (1.7 mb)
Washers - WD-10481N (1.7 mb)