Login:
Votes - 5, Average rating: 3.6 ( )

User manual Alliance Laundry Systems, model 40

Manafacture: Alliance Laundry Systems
File size: 1.22 mb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


9001000 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 33 Installation 47.24 in. 1.57 in. (1200 mm) (40 mm) 39.76 in. 42.91 in. (1010 mm) (1090 mm) 1.57 in. (40 mm) (1040 mm) 40.94 in. 3.15 in. 3.15 in. (80 mm) (80 mm) 100 MODEL CFD48N Figure 21 IMPORTANT: Drawing is not to scale. 34 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 Installation 47.24 in. 1.67 in. (1200 mm) (42.5 mm) 46.65 in. 50 in. (1185 mm) (1270 mm) 1.67 in. (42.5 mm) 40.94 in. (1040 mm) 3.15 in. 3.15 in. (80 mm) (80 mm) 135 MODEL CFD47N Figure 22 IMPORTANT: Drawing is not to scale. 9001000 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 35 Installation 51.2 in. 1.3 in. (1300 mm) (33 mm) 46.7 in. 49.25 in. (1185 mm) (1251 mm) 1.3 in. (33 mm) 44.9 in. (1140 mm) 3.15 in. 3.15 in. (80 mm) (80 mm) 165 POUND CFD47N Figure 23 IMPORTANT: Drawing is not to scale. 36 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 Installation CFD536N 200 POUND 3.19 in. (81 mm) 3.19 in. (81 mm) 1.73 in. (44 mm) 44.8 in. (1138 mm) 1.73 in. (44 mm) 51.18 in. (1300 mm) 51.18 in. (1300 mm) 44.8 in. (1138 mm) Figure 24 IMPORTANT: Drawing is not to scale. 9001000 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 37 Installation 18, 25 and 35 Pound Capacity with A or M in the 8th position of the Model Number (e.g. *X18PVXA6) 26 in. 2.17 in. (660 mm) (55 mm) 22.05 in. (560 mm) 26.38 in. (670 mm) 2.17 in. (55 mm) 19.13 in. (486 mm) 3.43 in. (87 mm) (87 mm) 3.43 in. 18 MODEL CFD49N Figure 25 IMPORTANT: Drawing is not to scale. 38 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 Installation 26 in. 2.17 in. (660 mm) (55 mm) 25.98 in. 30.31 in. (660 mm) (770 mm) 2.17 in. (55 mm) 3.43 in. (87 mm) 19.13 in. (486 mm) IMPORTANT: Drawing is not to scale. 25 MODEL Figure 26 CFD51N 3.43 in. (87 mm) 9001000 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 39 Installation 30.8 in. 1.77 in. (782 mm) (45 mm) 30.31 in. 33.85 in. (770 mm) (860 mm) 1.77 in. (45 mm) 25.16 in. (639 mm) 2.78 in. 2.78 in. (71 mm) (71 mm) 35 MODEL CFD50N Figure 27 IMPORTANT: Drawing is not to scale. 40 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 Mounting Bolt Installation (If Required) CFS485N 1 Base Frame 2 Bolt 3 Washer 4 Anchor Bolt/Plug Figure 28 6 in. (152 mm) 1 2 4 3 After the concrete has cured and the anchors are installed, proceed as follows: 1. Place the washer-extractor adjacent to the foundation. Do not attempt to move it by pushing on the sides. Always insert a pry bar or other device under the bottom of the frame of the washer-extractor to move it. 2. Place the washer-extractor carefully over the anchors. Installation 3. Put bolts through the machine in the anchors and fasten them. (For the 18, 25, and 35 models, the diameter of the bolt must be minimum 1/2-13 or 12 mm; for the 33, 40, 55, 75, 100, 135, 165 and 200 models, the diameter of the bolt must be minimum 5/8-11 or 16 mm.) 4. To level machine, fill the spaces between the machine base and floor with machinery grout. Grout completely under all frame members. Remove front and rear panels to gain access to all frame members. Force grout under the machine base until all voids are filled. 5. Remove the spacers carefully, allowing the machine to settle into the wet grout. 6. Position washers and locknuts on machinery anchor bolts and finger-tighten to machine base. 7. After the grout is completely dry, tighten the locknuts by even increments – one after the other – until all are tightened evenly and the machine is fastened securely to the floor. 8. Remove the four red transport brackets which secure the moving components of the machine during shipping. Refer to Figures 29, 31 and 32 for typical transport bracket locations. 9001000 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 41 Installation Removing the Transport Brackets To prevent damage during transportation, the machine has been equipped with four red transport brackets (refer to Figure 29 for 18, 25 and 35 models; refer to Figure 30 for 33 and 40 models; refer to Figure 31 for 55 and 75 models [depending on model number]; refer to Figure 32 for 100, 135, 165 and 200 models) to eliminate every possible movement of the tub. After the machine has been placed level, take off the service panels and the back panel to remove these transport brackets. WARNING The machine must never be activated before removing these transport brackets. W489 1 Transport Brackets CFD65N 1 18, 25 AND 35 MODELS WITH U IN THE 8TH POSITION IN THE MODEL NUMBER (E. G. *X18PVXU6) CFD34N 1 18, 25 AND 35 MODELS WITH A OR M IN THE 8TH POSITION IN THE MODEL NUMBER (E. G. *X18PVXM6) Figure 29 42 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Installation 9001000 43 Figure 30 Figure 31 Figure 32 CFD543N 1 Transport Brackets...

Other models in this manual:
Washers - 100 (1.22 mb)
Washers - 165 (1.22 mb)
Washers - 18 (1.22 mb)
Washers - 200 (1.22 mb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category