Votes - 2, Average rating: 3.5 ( )

Manafacture: Alliance Laundry Systems File size: 3.79 mb File name: Language of manual:

2. Measure and add low sudsing, high efficiency (HE) detergent, fabric softener and bleach to the dispenser drawer. Refer to section on Using Your Dispenser Drawer. Follow instructions on detergent package for amount to use. NOTE: High efficiency (HE) detergents are designed especially for frontload washers to reduce oversudsing and maximize cleaning results. Look for the HE logo or “high efficiency” on the detergent’s label. IMPORTANT: If using non-HE detergent, avoid oversudsing by using only 1/2 of the detergent manufacturer's recommended amount. 3. Load clothes into wash drum. (18 pounds [8.1 kg] maximum dry clothes load.) Refer to section on Load Sizes. NOTE: Small items such as baby socks may get caught around the door. Place these articles inside a mesh garment bag. TLWT1L9W91919N1N FLW2169N FLW2170N FLW2170N -11- 802753 When washing bulky items such as blankets and comforters, use the HANDWASH/DELICATE cycle. The cycle includes 12 minutes of gentle agitation to clean items delicately and thoroughly. The extra rinse cycle may be selected to ensure complete removal of soap residue. A final spin extracts the moisture at a low speed to maintain the load’s balance and minimize wear to the articles. 4. Close the loading door tightly. The washer will not operate with the loading door open. 5. Set WASH/RINSE temperatures. There are four or five WASH/RINSE temperatures available – Boosted Hot Wash/Cold Rinse (select models only), Hot Wash/Cold Rinse, Warm Wash/ Warm Rinse, Warm Wash/Cold Rinse, Cold Wash/ Cold Rinse. Refer to the Water Temperature section for the temperature that works best for your garments. 6. Select EXTRA RINSE if desired. The extra rinse control is useful for detergent sensitive skin. By pressing the EXTRA RINSE to ON, the REGULAR, PERMANENT PRESS, and DELICATE cycles will each provide an additional rinse. If the rinse is desired, press the switch to ON. When the extra rinse is not wanted, OFF should be selected. 7. Select the cycle according to the type of fabric being washed. Use the indicator dot on the cycle selector knob as a guide. 8. Press and hold the START button for two seconds to start the washer. The DOOR light will come on after a short delay, water fill will begin, and wash drum will begin tumbling. NOTE: Washer door MUST be closed tightly to start washer. FLW2171N FLW2174N To reduce the risk of serious injury, do not bypass the loading door switch by permitting the washer to tumble or spin with the loading door open. W095 WARNING FLW2175N WARNING Window may be hot in the Boosted Hot and Hot wash cycles. W325 If items need to be added or removed after a cycle has started, turn the cycle selector knob to the OFF position. Wait until the DOOR light goes off (approximately 45 seconds after cycle has been stopped), open door, add or remove items, and start the cycle again. There is no agitator on this washer. Instead, the clothing gently tumbles through the water. The wash action consists of a period of tumbling in o...

Download now

Please, enter two numbers from picture: