Votes - 2, Average rating: 4.5
(
)
)
|
manual abstract
Disconnect power by shutting off appropriate breaker or fuse. 70278501 (EN) © Published by permission of the copyright owner – DO NOT COPY or TRANSMIT Installation/Operation Supplement 22. Install this tumbler according to the INSTALLATION INSTRUCTIONS. All connections for electrical power, grounding, and gas supply must comply with local codes and be made by licensed personnel when required. 23. Remove laundry immediately after tumbler stops. 24. Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed all warnings or precautions. To reduce the risk of poisoning or chemical burns, keep them out of reach of children at all times (preferably in a locked cabinet). 25. Do not tumble fiberglass curtains and draperies unless the label says it can be done. If they are dried, wipe out the cylinder with a damp cloth to remove particles of fiberglass. 26. Always follow the fabric care instructions supplied by the garment manufacturer. 27. Never operate the tumbler with any guards and/or panels removed. 28. DO NOT operate the tumbler if it is smoking, grinding, has missing or broken parts. 29. DO NOT bypass any safety devices. 30. Solvent vapors from dry-cleaning machines create acids when drawn through the heater of the drying unit. These acids are corrosive to the tumbler as well as to the laundry load being dried. Be sure make-up air is free of solvent vapors. 31. Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage. WARNING To reduce the risk of serious injury, install lockable door(s) to prevent public access to rear of tumblers. W055 © Published by permission of the copyright owner – DO NOT COPY or TRANSMIT 70278501 (EN) Installation/Operation Supplement Installation Specifications and Dimensions Specifications 50 Pound 75 Pound Noise level measured during operation at operator position of 1 meter (3.3 feet) in front of machine and 1.6 meters (5.2 feet) from floor. 63 dBA 69 dBA Net Weight (approximate): kg (lbs.) 247 (545) 279 (615) Cylinder Size: mm (in.) 940 x 762 (37 x 30) 940 x 914 (37 x 36) Cylinder Capacity (dry weight): kg (lbs.) 22.7 (50) 34 (75) Air Outlet Diameter: mm (in.) 203 (8) 203 (8) Maximum Static Back Pressure: mbar (W.C.I.) 1.3 (0.5) 1.3 (0.5) Maximum Airflow: L/sec. (C.F.M.) 354 (750) Gas/Steam 50 Hz 354 (750) Gas/Steam 60 Hz 434 (920) Electric 354 (750) Motor Horsepower: Nonreversing Reversing Fan Cylinder 1/2 1/3 1/3 3/4 1/3 1/3 Gas Models Gas Connection 1/2 in. NPT 1/2 in. NPT Gas Burner Rating: Mj/hr (Btu/hr) 126.6 (120,000) 174.1 (165,000) Electric Models Heating Elements Rating: Kilowatts (kW) 21 kW (240 V/50 Hertz) 30 kW (other voltages) 30 kW Steam Models Steam Connection 3/4 in. NPT 3/4 in. NPT Steam Coil Rating: Btu/hr (Boiler Horsepower) 5.1 (177,500) 6.1 (210,300) 70278501 (EN) © Published by permission of the copyright owner – DO NOT COPY or TRANSMIT Installation/Operation Supplement Cabinet Dimensions B A G C D E F TMB2213N TMB2213N Models A B C D E F G 050 Gas and Electric 781 mm (30.75 in.) 717 mm (28.25 in.) 1194 mm (47 in.) 1946 mm (76.625 in.) 981 mm (38.625 in.) 838 mm (33 in.) 749 mm (29.5 in.) 050 Steam 781 mm (30.75 in.) 717 mm (28.25 in.) 1194 mm (47 in.) 2032 mm (80 in.) 981 mm (38.625 in.) 838 mm (33 in.) 749 mm (29.5 in.) 075 Gas and Electric 781 mm (30.75 in.) 717 mm (28.25 in.) 1346 mm (53 in.) 1946 mm (76.625 in.) 981 mm (38.625 in.) 838 mm (33 in.) 902 mm (35.5 in.) 075 Steam 781 mm (30.75 in.) 717 mm (28.25 in.) 1346 mm (53 in.) 2032 mm (80 in.) 981 mm (38.625 in.) 838 mm (33 in.) 902 mm (35.5 in.) © Published by permission of the copyright owner – DO NOT COPY or TRANSMIT 70278501 (EN) Installation/Operation Supplement Horizontal Exhaust Outlet Locations A B C TMB811N Models A B C 050/075 137 mm (5.375 in.) 203 mm (8 in.) 340 mm (13.375 in.) 70278501 (EN) © Published by permission of the copyright owner – DO NOT COPY or TRANSMIT Installation/Operation Supplement Gas Connection Locations A B TMB812N Models Diameter A B 050 1/2 in. NPT 394 mm (15.5 in.) 1670 mm (65.75 in.) 075 1/2 in. NPT 400 mm (15.75 in.) 1670 mm (65.75 in.) © Published by permission of the copyright owner – DO NOT COPY or TRANSMIT 70278501 (EN) Installation/Operation Supplement Electrical Connection Locations GAS AND STEAM A B B ELECTRIC A TMB813N Models A B Gas and Steam 241 mm (9.5 in.) 1613 mm (63.5 in.) Electric 483 mm (19 in.) 1626 mm (64 in.) NOTE: These figures are approximate dimensions only. 70278501 (EN) © Published by permission of the copyright owner – DO NOT COPY or TRANSMIT Installation/Operation Supplement Steam Connection Locations B A C D TMB814N Models Diameter A B C D 050/075 3/4 in. NPT 387 mm (15.25 in.) 1848 mm (72.75 in.) 190 mm (7.5 in.) 1645 mm (64.75 in.) © Published by permission of the copyright owner – DO NOT COPY or TRANSMIT 70278501 (EN) Installation/Operation Supplement Position and Level the...