Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. SA-VE505/VE502/VE305/VE302 Serial No. GB FR SA-VE505 SA-VE502 SA-VE305 SA-VE302 ©1999 by Sony Corporation WARNING WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. NOTICE FOR THE CUSTOMERS IN THE USA NOTICE FOR THE CUSTOMERS IN CANADA CAUTION TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS POLARIZED AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment. Note to CATV system installer: This reminder is provided to call CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Table of Contents Hooking up the system ......................... 4 Positioning the speakers ........................ 7 Listening to the sound ........................... 8 Adjusting the sound .............................. 9 Precautions ............................................ 11 Troubleshooting ................................... 12 Specifications ........................................ 12 About this manual The instructions in this manual are for SA-VE505, SA-VE502, SA-VE305, and SA-VE302, Sony Micro Satellite Systems. Differences between the systems • SA-VE505 and SA-VE305 The SA-VE505 and SA-VE305 are 5.1 channel speaker systems consisting of two front speakers, two rear speakers, one center speaker, and one subwoofer. Both support Sony Digital Cinema Sound, Dolby* Pro Logic, and Dolby Digital (AC-3), and are thus geared towards the enjoyment of movies. • SA-VE502 and SA-VE302 Consisting of two front speakers and one subwoofer, the SA-VE502 and SA-VE302 are suited for the enjoyment of music. * Manufactured under license from Dolby Laboratories Licensing Corporation. DOLBY, the double-D symbol ;, “PRO LOGIC” and “Dolby Digital (AC-3)” are trademarks of Dolby Laboratories Licensing Corporation. Any difference in operation is clearly indicated in the text, for example, “SA-VE505 only.” GB 3 Hooking up the system Connect the speaker system to the speaker output terminals of an amplifier. Make sure power to all components (included the subwoofer) is turned off before starting the hook-up. Hookup A (for SA-VE505/VE305) This configuration is used when the amplifier is connected to a DVD player, LD player, VCR or other video devices. Subwoofer Center* Front (Right) Front (Left) eEEeEeEeEeEeEeEeLINE IN WOOFER OUT FRONT CENTER REAR R R L L Amplifier Rear (Right) Rear (Left) Hookup B (for SA-VE505/VE305) Try this configuration instead of “Hookup A” in the following situations: — When there are no jacks on the amplifier for a subwoofer. — When you want stronger bass sound from the subwoofer. Front (Right) Center* Front (Left) R L R L EeEeSPEAKER IN SPEAKER OUT eeEEeEEeEeFRONT CENTER REAR R R L L EeEeEeSubwoofer Amplifier Rear (Right) Rear (Left) * (SA-VE505 only) Connect the center speaker to the amplifier and mount it onto the supplied speaker stand for placement on the top of the TV set (see page 7). Terminal (jack) connections EeEeEeEe continued Hooking up the system (continued) Hookup C (for SA-VE502/VE302) This configuration is used when the amplifier is connected to a CD player, MD deck, cassette deck, or other audio devices. Front (Right) Front (Left) eEEeEeEeFRONT R L R L SPEAKER IN SPEAKER OUT eeEER L Subwoofer Amplifier Terminal connections EeEeEeEe Notes • Make sure the plus (+) and the minus (–) terminals on the speakers are matched to the corresponding the plus (+) and the minus (–) terminals on the amplifier. • Be sure to tighten the screws of the speaker terminals securely since loose screws may become a source of noise. • Make sure all connections are firm. Contact between bear speaker wires at the speaker terminals may cause a short-circuit. • Do not connect the subwoofer to the amplifier’s CENTER output terminal (which is for Dolby Pro Logic or Dolby Digital (AC-3)). No bass will output from the subwoofer if you do. • For details regarding the connections on the amplifier ...
Other models in this manual:Satellite Receivers - SA-VE302 (179.73 kb)
Satellite Receivers - SA-VE502 (179.73 kb)
Satellite Receivers - SA-VE305 (179.73 kb)