Votes - 0, Average rating: 0
(
)
)
|
manual abstract
In the standby mode, select Menu > Settings > Network > Mode and one of the following service options: Digital preferred—The device works in digital mode but will also work in analog mode with digital mode unavailable. Digital only—The device only works in digital mode. Analog only—The device only works in analog mode. ¦ Network services The following features are network services. See "Network services," p. 5. Store a feature code 1. In the standby mode, select Menu > Settings > Network services > Network feature setting. 2. Enter the feature code from your network operator (for example, *633), and select OK. 3. Select the type of service that matches the feature code you entered (for example, Call forwarding). S e tti n g s The activated feature code is now stored in your device, and you are returned to the Feature code: field. Continue entering other feature codes (for example, *633), or press the end key to return to the standby mode. When you enter a network feature code successfully, the feature becomes visible in the Network services menu. Call forwarding Call forwarding tells your network to redirect incoming calls to another number. Call forwarding is a network service and may not work the same in all networks, so contact your network operator for availability. Activate The following options may not all appear in the display. Contact your network operator for more information. 1. In the standby mode, select Menu > Settings > Network services > Call forwarding > Forward all calls, Forward if busy, Forward if not answered, or Forward if out of reach > Activate. 2. Enter the number to which your calls, data, or other information will be forwarded, and select OK. Cancel In the standby mode, select Menu > Settings > Network services > Call forwarding > Cancel all call forwarding. Cancel all call forwarding may affect your ability to receive voice mail messages. Contact your network operator for specific details. Call waiting If your network operator supports this feature, call waiting notifies you of an incoming call even while you are in a call. You can then accept, reject, or ignore the incoming call. 1. In the standby mode, select Menu > Settings > Network services > Call waiting > Activate or Cancel. 2. During a call, select Answer, or press the call key or voice key to answer the waiting call. The first call is put on hold. 3. Press the end key to end the active call. S e tti n g s Send caller ID If your network operator supports this feature, you can allow or prevent your number from appearing on the receiving caller ID. In the standby mode, select Menu > Settings > Network services > Send my caller ID > Yes or No. View your phone number In the standby mode, select Menu > Settings > Network services > My number selection. ¦ Restore factory settings You can reset some of the menu settings to their original values. Data that you have entered or downloaded is not deleted (for example, entries in your contacts list are not affected). 1. In the standby mode, select Menu > Settings > Restore settings. 2. Enter the lock code, and select OK. See "Change lock code," p. 68. Note: Depending on your wireless service provider, your device may sometimes ask you for the security code (defaulted to 12345) instead of the lock code. Org a n i zer 11. Organizer Your device contains features to help organize your everyday life, including an alarm clock, calendar, notes, to-do list, calculator, countdown timer, and stopwatch. ¦ Alarm clock If the alarm time arrives with the device switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger. Set or change alarm setting The alarm clock depends on the device clock, which sounds an alert anytime you specify and even works with the device turned off. 1. In the standby mode, select Menu > Organizer > Alarm clock > Alarm time > On. 2. Enter the time for the alarm in hh:mm format. 3. Select am or pm (with 12-hour format selected), and select OK. Alarm on appears briefly in the display, and appears in the standby mode. Repeat alarm You can set the alarm to repeat. In the standby mode, select Menu > Organizer > Alarm clock > Repeat alarm. Set the alarm tone You can set which tone to play when the alarm sounds. In the standby mode, select Menu > Organizer > Alarm clock > Alarm tone > Standard, Radio, or Open Gallery to choose the tone you want to use. If you set your alarm to Radio, use an accessory that supports FM stereo. Snooze time-out To set the alarm snooze time, select Menu > Organizer > Alarm clock > Snooze time-out > 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, or Other (to enter up to 60 minutes snooze time). Alarm conditions When the alarm sounds, your device beeps, vibrates (if vibrating alert is on for cur...