Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Keep microSDHC and microSD cards out of the reach of small children. You can extend the available memory with a microSDHC or microSD card with a capacity of up to 8 GB. Optimal performance is with a 4 GB microSD card. You can insert or remove a microSDHC or microSD card without switching the device off. To maximize the performance of your device, it is recommended that no more than 100 files are stored in any folder. Insert the microSD card The memory card may be supplied with the device, and may already be inserted. 1. Remove the back cover. 2. Insert the memory card in the slot with the contact area as shown in the graphic. Make sure that the contact area is facing the connectors on the device. 3. Push the card in until it locks into place. Important: The microSD card must be inserted in the slot with the gold-colored area facing the front of the device. Eject the microSD card Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted. 1. Press the power key briefly, and select Remove memory card. 2. Remove the back cover. 3. Press the end of the memory card to release it from the memory card slot. 4. Replace the cover. After you install applications to a compatible memory card, installation files (.sis, .sisx) remain in the device memory. The files may use large amounts of memory and prevent you from storing other files. To maintain sufficient memory, use Nokia PC Suite to back up installation files to a compatible PC, then use the file manager to remove the installation files from the device memory. See "Install an application," p. 50. If the SIS file is a message attachment, delete the message from the Messaging inbox. Get started ¦ ¦ Your battery has been partially charged at the factory. If the device indicates a low charge, do the following: 1. Connect the charger to a wall outlet. 2. Connect the charger to the device. The charging port is behind the black cover. 3. When the device indicates a full charge, disconnect the charger from the device, then from the wall outlet. You do not need to charge the battery for a specific length of time, and you can use the device while it is charging. If the battery is completely discharged, it may take several minutes before the charging indicator appears on the display or before any calls can be made. ¦ Switch the device on or off Press and hold the power key. If the device asks for a PIN code, enter the PIN code, and select OK. If the device asks for the lock code, enter the lock code, and select OK. Phone setup application The Phone setup application starts when you switch on your device for the first time. With the Phone setup application, you can customize how the device looks and works. To open Phone setup later, select > Settings > Phone setup. Set time and date To set the correct time zone, time, and date, select the country you are presently in, then enter the local time and date. Some networks automatically update the time and date. For information on this feature, contact AT&T. ¦ Access codes To set how your device uses access codes, select > Settings > Config. > General > Security > Phone and SIM card. Lock code Lock code When the device or keypad is locked, calls may be possible to the official emergency number programmed into your device. PIN codes The personal identification number (PIN) code or the universal personal identification number (UPIN) code (4 to 8 digits) help to protect your SIM card. The (U)PIN code is usually supplied with the SIM card. Set the device to request the code each time the device is switched on. The PIN2 code may be supplied with the SIM card and is required for some functions. The signing PIN is required for the digital signature. The module PIN and the signing PIN are supplied with the SIM card if the SIM card has a security module in it. PUK codes The personal unblocking key (PUK) code or the universal personal unblocking key (UPUK) code (8 digits) are required to change a blocked PIN code and UPIN code, respectively. The PUK2 code is required to change a blocked PIN2 code. If needed, contact AT&T for the codes. Call restriction password The call restriction password (4 digits) is required when using call restriction. You can obtain the password from AT&T. If the password is blocked, contact AT&T. ¦ Digital rights management Content owners may use different types of digital rights management (DRM) technologies to protect their intellectual property, including copyrights. This device uses various types of DRM software to access DRM-protected content. With this device you can access content protected with WMDRM 10 and OMA DRM 2.0. If certain DRM software fails to protect the content, content owners may ask that such DRM software's ability to access new DRM- protected content be revoked. Revocation may also prevent renewal of such DRM-p...