Votes - 3, Average rating: 4.7
(
)
)
|
manual abstract
Select an option for sending data via Bluetooth. NOTE: The method for selecting an option may vary by data type. Search for and pair with a Bluetooth-enabled device. Receive data using the Bluetooth wireless feature In Idle mode, open the application list and select Settings > Wireless & networks > Bluetooth settings > Discoverable. Your device is dicoverable to other Bluetooth devices for 120 seconds. When prompted, enter the PIN for the Bluetooth wireless feature and select OK (if necessary). Select Accept to confirm that you are willing to receive data from the device. Received data is saved to the bluetooth folder. NOTE: If you receive a contact, you can save the contacts into the phonebook as following. : Touch Contact > Press > More > Import/Export. Wi-Fi Learn to use your device’s wireless networking capabilities to activate and connect to any wireless local area network (WLAN) compatible with the IEEE 802.11 b/g/n standards. You can connect to the internet or other network devices anywhere an access point or wireless hotspot is available. Activate the WLAN feature In Idle mode, open the application list and select Settings > Wireless & networks > Wi-Fi settings > Wi-Fi. NOTE: An active WLAN running in the background will consume battery power. To preserve battery power, activate the WLAN only when needed. Find and connect to a WLAN In Idle mode, open the application list and select Settings > Wireless & networks > Wi-Fi settings. The device will automatically search for available WLANs. Select a network under Wi-Fi networks. Enter a password for the network (if necessary). Select Connect. Add a WLAN manually In Idle mode, open the application list and select Settings > Wireless & networks > Wi-Fi settings > Add Wi-Fi network. Enter the SSID for the network and select the security type. Set the security settings depending on the selected security type. Select Save. Connect to a WLAN using a Wi-Fi Protected Setup (WPS) Using WPS, you can connect to a secured network. To connect to a WLAN with a WPS button, In Idle mode, open the application list and select Settings > Wireless & networks > Wi-Fi settings. Select Push Button Connection. Press a WPS button on the access point within 2 minutes. To connect to a WLAN with a WPS button, In Idle mode, open the application list and select Settings > Wireless & networks > Wi-Fi settings. Select a network indicated by the WPS icon and select WPS PIN. On the access point, enter the PIN and press the start button. Camera 18 Camera Getting to know the viewfinder Switch lenses – Switch between the rear–facing camera lens and the front–facing camera lens. Zoom – Zoom in or zoom out. Alternatively you can use the side volume keys. Brightness – This defines and controls the amount of light entering the image. Flash – Allows you to turn on the flash when taking a photo in dark conditions. Settings – Touch this icon to open the advanced settings menu. Video mode – Slide this icon down to switch to video mode. Cap...
Other models in this manual:Mobile Phones - P940 (4.77 mb)
Mobile Phones - P940 PRADA 3.0 (4.77 mb)