Votes - 3, Average rating: 4
(
)
)
|
Other manuals for this model:
manual abstract
To reset the cost, you need the PIN2 code. 1. Press < [Menu] in standby mode. 2. Press 2 for direct access or use L and R to enter Call register, then select Call charges. 3. Scroll to highlight Call costs and Press < [Select]. The following 4 submenus: Last call, All calls, Remaining and Reset all. Accessing MenuNote • The actual cost invoiced for calls by your service provider may vary, depending upon network features, rounding-off for billing, tax, and etc. Call register [Menu 2] Settings [Menu 2-6-3] (SIM Dependent) • Set tariff You can set the currency type and the unit price. Contact your service providers to obtain charging unit prices. To select the currency or unit in this menu, you need the PIN2 code. If you want to input @, ., $ symbol, clear all currency strings and then press * key. If you want to change symbol, press * key again. Note • When all units have been used, no calls can be made except emergency calls. Depending on the SIM card, you need the PIN2 code to set a call cost limit. • Set credit This network service allows you to limit the cost of your calls by selected charging units. If you select Read, the number of remaining unit is shown. If you select Change, you can change your charge limit. • Auto display This network service allows you to see automatically the cost of your last calls. If set to On, you can see the last cost when the call is released. Accessing the Menu GPRS information [Menu 2-7] You can check the amount of data transferred over the network through GPRS. In addition, you can view how much time you are online. Call duration [Menu 2-7-1] You can check the duration of Last call and All calls. You can also reset the call timers. Data volumes [Menu 2-7-2] You can check the Sent, Received or All and Reset all. Accessing Profiles [Menu 3] In this menu, you can adjust and customize the phone tones for different events and environments. 1. Press < [Menu] in standby mode. 2. Press 3 for direct access or use L and R. 3. You can also enter this menu directly by pressing L key in standby mode. Vibrate only [Menu 3-1] You can adjust the profile as Vibration if you need vibration mode. In the mode, all kinds of alert are Vibrate or Silent. Quiet [Menu 3-2] You can adjust the profile as Quiet if you are in quiet place. General [Menu 3-3] You can adjust the profile as General. Loud [Menu 3-4] You can adjust the profile as Loud if you are in a noisy environment. Headset [Menu 3-5] You can adjust the profile as Headset when you put on a headset. Car [Menu 3-6] You can adjust the profile as Car when you activate Handsfree kit. Accessing the Menu Note • Headset and Car profiles can be activated only when Handsfree kit or Ear microphone put on the handset. However, their properties can be personalised. Activate [Menu 3-x-1] Activates the selected Profile. Personalise [Menu 3-x-2] Each has the submenus as shown below except for Vibrate only. Call alert type Allows to select alert type such as Ring, Vibrate, etc. for the incoming for adjusting environment. Ring tone Allows to set the ring tone for adjusting environment. Ring volume Allows to set the ring volume for adjusting environment. Message alert type Allows to alert when receiving a message for adjusting environment. Message tone Allows to select the alert tone for message reception. Keypad volume Allows to set the keypad volume for adjusting environment. Accessing Profiles [Menu 3] Keypad tone Allows to select the keypad tone for adjusting environment. Auto answer This function will be activated only when your phone is connected to the headset or handsfree kit. • Off : The phone will not answer automatically. • After 5 secs : After 5 seconds, the phone will answer automatically. • After 10 secs : After 10 seconds, the phone will answer automatically. Note • If you set the Handsfree kit to the phone, you can’t use the vibrate mode related with Call alert type or Message alert menu. In car menu, the following submenus are available; - Call alert type : Ring, Silent - Message alert type : Ring once, Ring periodically, Silent Accessing the Menu Settings [Menu 4] You can set the following menus for your convenience and preferences. 1. Press < [Menu] in standby mode. 2. Press 4 for direct access to enter Settings. Alarm clock [Menu 4-1] You can set up to 5 alarm clocks to go off at a specified time. 1. Select On and enter the alarm time you want. 2. Select the repeat period : Once, Mon~Fri, Mon~Sat, Everyday. 3. Select the alarm tone you want and press < [OK]. 4. Edit the alarm name and press < [OK]. 5. If you set Alarm clock to Power off alarm the alarm goes off at a specified time even though the phone is switched off. Date & Time [Menu 4-2] You can set functions relating to the date and time. Set date [Menu 4-2-1] You can enter the current date. Date format [Menu 4-2-2] You can set the Date format such as DD/MM/YYYY, MM/DD/YYYY, YYYY/MM/DD. (D: Day / M: Month / Y: Year) Set time [Menu 4-2-3] You can enter the current time. Time format...