Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
Exchange rates change often. To ensure an accurate conversion, you must enter a current exchange rate. To set a base currency, 1. In Standby mode, press [ ] > Organiser > Converter. 2. Scroll right until the type shows Currency (if necessary). 60 3. Press < Options> > Currency rates. 4. Scroll to a currency and press < Options> > Rename currency. 5. Enter the name of the base currency and press the Confirm key. 6. Press < Options> > Set as base currency. 7. Press the Confirm key to confirm. To add other currencies and exchange rates, 1. Repeat steps 1-4 above. 2. Enter the name of a new currency and press the Confirm key. 3. Scroll to the new currency and enter the exchange rate. 4. Press < Options> > Save. Convert currencies 1. In Standby mode, press [ ] > Organiser > Converter. 2. Scroll right until the type shows Currency (if necessary) . 3. Scroll down to Unit and scroll right currency to convert. 4. Scroll down to Amount and enter the amount to convert. 5. Scroll down to Unit and scroll right to select a currency to convert to. The device displays the conversion result. Convert measurements 1. In Standby mode, press [ ] > Organiser > Converter. 2. Scroll right to change the type of measurement. 3. Scroll down to Unit and scroll right to change the base unit ( if necessary). 4. Scroll down to Amount and enter the base amount. 5. Scroll down to Unit and scroll right to change the conversion unit (if necessary). The device displays the conversion result. GPS data You can view GPS data to help you navigate, show your position, or monitor trip details. Before you can use GPS data, you must activate a positioning method via a Bluetooth wireless connection or a wireless network connection. Activate a positioning method 1. In Standby mode, press [ ] > Tools > GPS data. 2. Press < Options> > Positioning settings > Positioning methods. 3. Scroll to a positioning method ( Bluetooth GPS, or Network based) and press < Options> > Enable. If you enable Bluetooth GPS, you must pair with a Bluetooth-enabled device (see "Search for and pair with a Bluetoothenabled device" • p. 54). Once you activate a positioning method, your device will attempt to open that connection when you launch GPS data. 61 additional programs Navigate with GPS data 1. In Standby mode, press [ ] > Tools > GPS data > Navigation. 2. Press < Options> > Set destination > Coordinates. 3. Enter the latitude and longitude of your destination and the Confirm key. Your device will display the direction of your destination, your current speed, and the duration of your trip. 4. To stop the GPS navigation, press < Options> > Stop navigation. View your current position In Standby mode, press [ ] > Tools > GPS data > Position. Monitor trip details 1. In Standby mode, press [ ] > Tools > GPS data > Trip distance. 62 2. Press < Options> > Start. Your device will track trip details, including distance, time, and speed. 3. To stop monitoring trip details, press < Options> > Stop. Landmarks With Landmarks, you can save your current location or manually enter new locations. 1. In Standby mode, press [ ] > Tools > Landmarks. 2. Press < Options> > New landmark > Current position or Enter manually. To add your current location automatically, your device must have an active connection. 3. Enter details about the landmark (if necessary). 4. When you are finished entering landmark information, press < Done>. additional programs Smart reader The Smart reader application allows you to take a photo of a namecard and extract contact information from the card, and save it as a new contact in Contacts. You can also take a photo of a document and convert it to a editable note. • Hold the device firmly while taking the namecard or document. • Be careful not to let any shadows on the namecard or document. • Place the namecard or document on level, evenly lit place and photograph it. • Depending on the shooting environment, the result of the namecard or document conversion may not be satisfying. To take a photo of a namecard, 1. In Standby mode, press [ ] > Media > Smart reader. 2. Center the namecard within the frame. 3. Press [ ] or the Confirm key to take the photo. Your device recognises the namecard and converts it to contact card format. 4. Press < Options> > Add to Contacts to save the contact card. 5. Edit the contact information (if necessary). 6. Press < Done> . To take a photo of a document, 1. In Standby mode, press [ ] > Media > Smart reader. 2. Press < Options> > Mode > Text recognition. 3. Center the document. 4. Press [ ] or the Confirm key to take the photo. 5. Edit the text (if necessary). 6. Press < Options> > Save to notepad. 63 additional programs additional programs Dictionary With Dictionary, you can look up words of various language. The dictionary is available depending on your region. Look up words 1. In Standby mode, press [ ] > Organiser > Dictionary. 2. Enter an English word and press the Confirm key. Change the dictionary 1. In Standby mode, press [ ] ...