Votes - 4, Average rating: 4.5 ( )

Manafacture: Motorola File size: 824.75 kb File name: Language of manual:

0 Press * to display the function menu. 0 Press ► to move the cursor to Q. 0 Press * to confirm the delete request. O Press * to delete the message. Repeat these steps to delete each message. Setting Auto On/Off To set your pager’s auto on/off feature, proceed as follows: O Press * to display the function menu. O Press to move the cursor to 3. © Press * to display the auto on/off screen. When the screen is first displayed, the cursor is at the farthest left position. The enabled (3) or disabled (3) symbol indicates the current status. /^T OFF 3 0:00 i:LH 0:№Hhr V JJ Example of Auto On/Off Screen 0 Press i or y to select 3 or 3. 0 Press ► to move the cursor to the hour digit. The Auto On time is displayed on the left and the Auto Off time is displayed on the right. 0 Press A or f to adjust the hour. 13 O Repeat the process for each set of digits for both the on time and the off time (hour, minute, AM/PM if your pager is set to display time in the 12 hour mode). © Press * to activate auto on/off. The 3 symbol is displayed if the auto on/off function is enabled. If the on time is equal to the off time, the pager does not enable the auto on/off function. Other Features Battery Gauge: The battery gauge indicator is located on the status screen and keeps you informed of the battery energy level. The five indicators range from full to low: ^ (full), ^ (3/4), ^ (1/2), ^ (1/4), and (low). Key Click: When this feature is enabled, and the pager is in the audible mode, a “click” is emitted whenever a button is pressed. The click is not heard when the pager is in the silent mode. Duplicate Message: If the same message is received more than once, DUPLICATE MESSAGE is displayed at the beginning of the new message. The new message contains the latest time and date stamp. Out of Range: With this option enabled, is displayed whenever you are out of range of the paging transmitter. Your pager can also alert you of this if this feature is enabled. The symbol is no longer displayed when you return to your transmitting area. Errored Data Indicator: The g symbol displays when potentially corrupt data is received. The indicator alternates with the corrupted character. 14 Alphanumeric and Long Numeric Missing Fragment Indicators: If part of the message has not been received, <...> or.....is displayed. Note: This applies to ADVISOR Gold FLX pagers only. Maildrop History: When this option is enabled, the pager stores up to four history files per maildrop (information services) slot selected. When a new maildrop message is received on a specific slot, the existing message is “pushed” into the history area and the new message is stored in the maildrop slot. When a fifth history file is received, the oldest history file is deleted. Battery Information Your pager is designed to operate with a single AA-size alkaline battery (carbon zinc batteries are not recommended). See the diagram on the following page for the battery door location. To install or replace the battery, place the pager face down and proceed as follows: O Unlock the battery door by sliding the door latch away from the battery door. O Slide the battery door in the direction of the arrow (toward the outer edge). © Lift the battery door away from the housing to remove it. Lift the battery out of the battery compartment, taking note of the positive (+) and negative (-) markings on the battery and the pager housing. 15 ADVISOR GoldFLX Pager Battery Replacement (rear view) To install a new battery, reverse this procedure, taking note of the positive (+) and negative (-) markings. CAUTION: Do not insert the battery backwards or the messages stored or locked in memory will be erased. Care of Your Pager To maintain the fine optical quality of the display in the pager, do not subject it to extreme temperatures and moisture. Cleaning Your Pager To clean smudges and grime from the exterior of the housing, use a soft, nonabrasive cloth moistened in a mild soap and water solution. Rinse the surface using a second cloth moistened in clean water. Do not immerse the pager in water. Do not use any other cleaning solutions. 16 Repair and Maintenance Your pager, properly handled, is capable of many years of trouble-free service. However, if your pager ever requires service, Motorola’s Service Organization, staffed with specially trained technicians, offers conveniently located repair and maintenance facilities throughout the world. Please contact your paging service representative or a Motorola sales office for more information. Patent Information This product is manufactured under one or more Motorola U.S. Patents. A partial listing of these patents is provided on the inside surface of the battery door. Patent numbers listed under the heading VH and QW apply to specific product models, as indicated below. Patent numbers listed under the heading ALL apply to all models of this product. Other patents covering this product are pending. The model...

Download now

Please, enter two numbers from picture: