Votes - 3, Average rating: 4
(
)
)
|
manual abstract
Torque the three set screws (B, D) to 9-11 ft. lbs. 2 Gear Case Kit Installation Instructions Assemble Housing 1. Install the side covers (A, Figure 4) and secure with the original hardware. 2. Reinstall the bearings (C), washers, and retaining rings (D) in both side covers. Figure 4. Assemble Housing A. Side Cover B. Housing C. Bearing D. Washers & Retaining Ring Fill Auger Gear Case Oil 1. Remove the fill plug (Figure 5). Fill the gear box with The Dealer Line Winter Weight Worm Gear Oil until the oil level reaches the bottom of the fill hole. Figure 5. Checking Auger Gear Case Lubrication 3 Installation Instructions NOTES Gear Case Kit SimpHnity MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA Form No. 1732778-01 Rev. 12/2006 TP 200-4412-01-SK-SN Briggs & Stratton Yard Power Products Group Copyright © 2006 Briggs & Stratton Corporation Milwaukee, WI USA. All Rights Reserved 4...
Other models in this manual:Snow Blowers - 1687227 (153.41 kb)