Login:
Votes - 4, Average rating: 3.8 ( )

User manual Sears, model Craftsman 536.886531

Manafacture: Sears
File size: 3.06 mb
File name: 1a2050fd-f494-4cad-8a26-8e6ab520cb55.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


= 11 11 11 ,=H ,,,,HH= ,H 111 11,11,1 =,==,=H= 11 1111 SAFETY RULES _ CAUTION. ALWAYS DISCONNECT SPARK PLUG WIRE ANDPLACE WIRE WHERE IT CANNOT CONTACT SPARK PLUG TQ PREVENT ACCIDENTAL STARTING WHEN SETTING-UP, _li TRANSPORTING, ADJUSTING OR MAKING REPAIRS, IMPORTANT SAFETY STANDARDS REQUIRE OPERATOR PRESENCE CONTROLS TO MINIMIZE THE RISK OF INJURY. YOUR SNOW THROWER IS EQUIPPED WITH SUCH CONTROLS. DO NOT ATTEMPT TO DEFEAT THE FUNCTION OF THE OPERATOR PRESENCE CONTROL UNDER ANY CIRCUMSTANCES. TRAINING 1. Read the operator's manual carefully. Be thoroughly familiar with the controls and the proper use of the snow thrower. Know how to stop the snow thrower and disengage the controls quickly. 2. Never allow children to operate the snow thrower and keep them away while it is operating. Never allow adults to operate the snow th rower without proper instruction. Do not carry passengers. 3. Keep the area of operation clear of all persons, particularly small children, and pets_ 4. Exercise caution to avoid slipping or falling, especially when operating in reverse. PREPARATION 1. Thoroughly inspect the area where the snow thrower is to be used and remove all doormats, sleds, boards, wires, and other foreign objects. 2. Disengage all clutches and shift into neutral before starting the engine (motor). 3. Do not operate the snow thrower without wearing adequate winter outer garments° Wear footwear that will improve footing on slippery surfaces, 4, Handle fuel with care; it is highly flammable. (a) Use an approved fuel container. (b) Never remove fuel tank cap or add fuel to a running engine or hot engine. (c) Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors. (d) Replace fuel tank cap securely and wipe up spilled fuel. (e) Never store fuel or snow thrower with fuel in thetank insideof abuilding where fumes may reach an open flame or spark. (f) Check fuel supply before each use, allowing space for expansion as the heat of the engine (motor) and/or sun can cause fuelto expand. , Use extension cords and receptacles as specified by the manufacturer for all snow throwers with electric drive motors or electric starting motors 6_ Adjust the snow thrower height to clear gravel or crushed rock surfaces. 7o Never attempt to make any adjustments while the engine (motor) is running (except when specifically recommended by the manufacturer). 8, Let engine (motor) and snow thrower adjust to outdoor temperatures before starting to clear snow. 9. Always wear safety glasses or eye shields during operation or while performing an adjustment or repair to protect eyes from foreign objects that may be thrown from the snow thrower. OPERATION 1. Do not put hands or feet near or under rotating parts° Keep clear of the discharge opening at all times,, 2. Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. 3. After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, disconnect the cord on electric motors, thoroughly inspect the snow thrower for any damage, and repair the damage before restarting and operating the snow thrower. 4, If the snow thrower should start to vibrate abnormally, stop the (motor) and check immediately forthe cause_ Vibration is generally a warning of trouble° 5. Stop the engine (motor) whenever you leave the operating position, before unclogging the auger/ impeller housing or discharge guide, and when making any repairs, adjustments, or inspections. When cleaning, repairing, or inspecting, make certain the auger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent accidental starting° 7 Take all possible precautions when leaving the snow thrower unattended. Disengage the auger/ impeller, shift to neutral, stop engine, and remove key. SAFETY RULES 8. Do not run the engine indoors, except when starting the engine and for transporting the snow thrower in or out of the building. Open the outside doors; exhaust lumesaredangerous (containing CARBON MONOXIDE, an ODORLESS and DEADLY GAS). 9. Do not clear snow across the face of slopes. Exercise caution when changing direction on slopes. Do not attempt to clear steep slopes. 10. Never operate the snow thrower without proper guards, plates or other safety protective devices in place. 11. Never operate the snow thrower near glass enclosures, automobiles, window wells, drop-oils, and the like without properadjustment of the snow discharge angle. Keep children and pets away. 12. Do not overload the machine capacity by attempting to clear snow at too fast a rate. 13o Never operate the snowthrower at high transport speeds on slippery surfaces. Look behind and use care when backing° t4. Never direct discharge at bystanders or allow anyone in tront of the snow thrower. 15. Disengage power to the auger/impeller when snow thrower is transported or not in use. 16. Useonly attachments and acce...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category