Votes - 1, Average rating: 4
(
)
)
|
manual abstract
Carrying the Copier by the Carrying Handle Fold the trays up as shown in the illustration, and insert the trays into the opening between the disc and the platen cover. Then pull out the carrying handle. (See “Parts and Their Functions”, on p. 15.) Firmly grip the carrying handle. Slowly tilt the copier upward. Then lift the copier. When the unit is tilted the platen will automatically lock into place. 12 01/ PC160-USA 12 05.2.1, 18:40 REQUEST: •Make sure that the trays are set correctly under the disc on the platen cover. •Double check to make sure the trays are set correctly under the disc on the platen cover. • If transporting the copier over a long distance secure the platen cover with packing tape and remove the cartridge. (See p.14.) •When transporting the copier take extra care not to subject it to vibrations or shock. • If you need to set the copier down for a while, place it upright on a flat level surface with the carrying handle on top. •When lowering the copier to a horizontal position (installation position), do so slowly. Carrying the Copier by the Sides Secure the platen with packing tape. Push in the carrying handle. Then fold up the trays. Insert the trays into the opening between the disc and the platen cover. Standing behind the copier as shown in the illustration, firmly grasp the front and rear sides of the copier and lift. REQUEST: •Do not attempt to use the paper feeding slot, exit slot, multi-stack tray or the copy tray as handles. Attempting to carry the copier by holding one of these may cause it to break off, and thus cause the handler to drop and damage the copier. Getting Started 1 Transporting the Copier 13 01/ PC160-USA 13 05.2.1, 18:40 1 Transporting the Copier Getting Started Transporting the Copier by Car Place the copier on a stable surface (i.e., on the seat) inside the car. REQUEST: •Remove the cartridge from the copier and place it in its original shipping box. Then secure the platen with packing tape. Finally place the copier in its original shipping box. •Do not leave the copier inside a car for long periods of time; the temperature inside a car can exceed the recommended extremes. •Avoid rough roads; excessive vibrations may damage the copier. •Do not place the copier in direct sunlight. Use a cover if necessary. 14 01/ PC160-USA 14 05.2.1, 18:40 Parts and Their Functions Parts and Their FunctionsParts and Their Functions Up to 50 sheets of copy paper can be loaded in the multi-stack tray at a time. Main Unit Platen Cover Platen Glass Left Cover (See p.45.) Open when removing jammed paper from the output area. Copy Tray Left Cover Release Button (See p. 45.) Press to open the left cover. 01/ PC160-USA 05.2.1, 18:4015 1 Parts and Their Functions Getting Started Top Cover Release Button (See pp. 22, 44 and 46.) Press to open the top cover. Multi-stack Tray Exit Slot 15 1 Parts and Their Functions Getting Started 16 Sealing Tape Grip Top Cover Open when changing the cartridge, clearing paper jams or cleaning the roller. Cartridge Copy Tray Disk Paper Feed Guides Adjust to fit paper size. Power Cord Connector (rear right) Paper Feeding Slot Multi-stack Tray Power Switch Exposure Recalibration Switch Slide up or down to adjust the copy exposure to one of three steps to accommodate dark, normal or light originals. Multi-stack Tray Carrying Handle Pull out to use when transporting the copier. 01/ PC160-USA 16 05.2.1, 18:40 1 Parts and Their Functions Getting Started Control Panel Error indications : Misfeed error / Load paper : Paper jam : Error : Error : Error Start Key Press to start copying. CAAE then then then Number of Copies/Error Message Indicator Shows the number of copies selected or any error messages. A (Auto) Indicator Lights up when the Auto Exposure Control is selected. Exposure Adjustment Lever Slide to manually adjust the copy exposure setting (lightness/ darkness). The AE Key Press to select or cancel the Auto Exposure Control. Paper Jam Indicator Number of Copies Key Clear/Stop Key Press to select the desired number of copies. Press to return the number of copies to one, or to stop the copier while copying. 17 Flashes when copy paper is jammed inside the copier. 01/ PC160-USA 17 05.2.1, 18:40 Getting Started 18 1 Installing the Copier 01/ PC160-USA Installing theInstalling the CopierCopier Checking the Package Contents Remove the copier and the accessories from the shipping box. Use the following checklist to make sure you have received all the necessary accessories included with your copier. Item Quantity Registration Card 1 Power Cord 1 Operator’s Manual 1 Cartridge 1 Muliti-stack tray 1 Copy tray 1 Installation Procedure Before installing the copier be sure to check the safety of the power source. Then proceed with the following procedure. Although the starter cartridge comes already installed in the main unit, it is necessary to remove the sealing tape from the cartridge before use. The cartridge cannot be used if the seal is not removed. (See “Installa...