Votes - 1, Average rating: 5 ( )

Manafacture: Kyocera File size: 1.96 mb File name: Language of manual:

The length of time that the copier uses to recover from the energy saver (auto preheat) function can be selected between within 10 seconds (priority to recovery) and within 30 seconds (priority to power save). (See “Auto preheat time” on page 6-4 and “Preheat recovery time” on page 6-5.) (English text panel) (Symbol panel) 4. Auto shut-off function This function automatically turns the main switch OFF (O) if no copying operation is preformed for a certain period of time (15 to 120 minutes). To make copies again, set the main switch to the ON (|) position. * If the optional printer board is installed, copying will be enabled when any of the operation keys is pressed or data is received from the computer. . Auto shut-off function The auto shut-off function is a power-saving feature which automatically turns OFF (O) the main switch when a certain time elapses without copying being performed. Copiers are generally in the standby mode more than operation mode, and power consumption in the standby mode occupies a large part of overall consumption. Having the copier turn OFF (O) automatically reduces unnecessary power consumption in the standby mode or at night when the copier is left on. The result is a lower electricity bill. * To change the time until the auto shut-off function starts, see “Auto shut-off time” on page 6-4. To cancel the auto shut-off function, see “Auto shut-off” on page 6-4. CHAPTER 5 FUNCTIONS 1. Layout copying Two or four originals can be combined into a single copy. The borderline of each original can also be marked with a solid line or dotted line. Setting originals (18 ppm copier) Original Original setting location DF Platen P PP L L L * The 15 ppm copier requires the optional memory copy board to perform layout copying. * The default borderline can be set (see “Layout (borderline)” on page 6-4). * The original and copy paper must be a standard size. 2 in 1 (15 ppm copier) (When scanning the originals individually, originals are arranged in the order of 1 and 2.) Use this mode to copy two originals onto one sheet. Original Original setting location DF Platen P PP LL L CHAPTER 5 FUNCTIONS 4 in 1 Use this mode to copy four originals onto one sheet. (When scanning the originals individually, originals are arranged in the order of 1, 2, 3 and then 4.) * In the 4 in 1 mode, the page arrangement can be selected (see "Layout (4 in 1)" on page 6-3). 1 1 To change the type of the borderline, hold down the 2 in 1/4 in 1 key for 5 seconds. “F17” appears on the copy quantity display and then a number appears. The number displayed indicates the type of the borderline as follows: 1: None 2: Solid line 3: Dotted line (English text panel) (Symbol panel) Setting originals (18 ppm copier) 2 2 Press the Number of Copies/Zoom (+) key or Number of Copies/Zoom (-) key and change the number to select the type of the borderline. (English text panel) (Symbol panel) Original Original setting location DF Platen P PP L L L 3 3 Press the Zoom Input/Enter key. The number of copies appears on the display. (15 ppm copier) (English text panel) (Symbol panel) Original Original setting location DF Platen P PP L LL CHAPTER 5 FUNCTIONS Press the 2 in 1/4 in 1 key to light the 2 in 1 indicator or 4 in 1 When scanning of the first original ends, “1” (number of 47 indicator. scanned originals) appears on the display. Place the next original. When using the platen, press the Start key. Repeat (English text panel) (Symbol panel) the same procedure for all the originals. (English text panel) (Symbol panel) 5 Set the originals. * Before setting originals on the platen, make sure they are in the correct sequence. * With the 15 ppm copier, if “ON” is selected for “DF auto 8 When scanning of all the originals ends, press the Zoom Input/Enter key or 2 in 1/4 in 1 key. Copying will start. start”, scanning starts automatically when an original is set in the DF (see page 6-3). Proceed to step 7. (English text panel) (Symbol panel) 6 6 Press the Start key. * If originals are set in the DF on the 18 ppm copier, originals are scanned one by one and copied. (English text panel) (Symbol panel) CHAPTER 5 FUNCTIONS 2. Sort copying Copies can be sorted into the required number of sets by storing original images in the memory before performing copying. * The 15 ppm copier requires the optional memory copy board to perform sort copying. 1 1 Press the Sort key to light the indicator. * With the 18 ppm copier, the Sort indicator automatically turns on when originals are set in the DF. (English text panel) (Symbol panel) 4 4 Press the Start key. * If originals are set in the DF on the 18 ppm copier, originals are scanned one by one and copied. (English text panel) (Symbol panel) 5 5 When scanning of the first original ends, “1” (number of scanned originals) appears on the display. Place the next original. When using the platen, press the Start key. Repeat the same procedure for all the originals. (English text panel) (Symbol panel) 2 2 Set the numbe...

Download now

Please, enter two numbers from picture: