Votes - 4, Average rating: 3.8 ( )

Manafacture: Xerox File size: 66.46 kb File name: CC_02_98_50_000.pdf Language of manual:

The CopyCentre will be unavailable during this time. Please make sure that the CopyCentre is free of faults and jams before starting any part of the upgrade. Upgrade Requirements To perform this upgrade, the following will be required: 1. A PC with the Xerox Utilities Tool version 03.00.0012 installed. By default, there will be an icon called 'Software Upgrade' on the desktop. A copy of the Xerox Utilities is supplied with each CopyCentre machine (in the left-hand side pocket). Updates are available from 2. The DC_02-98-50-000-bot-c.ugd upgrade file, accessible on the same PC. 3. A type A->B USB cable of 1.5m length or less. Upgrade Process 1. Plug the USB cable from a USB port on the PC into the back of the CopyCentre. 2. Power on the CopyCentre. 3. On the PC, start the Software Upgrade tool and click on 'Select File' button. 4. When the browser window appears, select the file DC_02-98-50-000-bot-c.ugd. 5. Select "Upgrade" to confirm you want to install this software version. This stage may take up to 15 minutes, during which the progress will be indicated both on the CopyCentre screen and on the utilities tool. 6. Once the upgrade is complete, the Software Upgrade tool will display the Upgrade Status Report, which should display 'Software Upgrade Successful' against the different modules, with no failures. Some modules may show 'Software Upgrade Not Required'; this is normal. Close the tool by clicking on 'OK'. 7. The system will automatically reboot. The message "Restoring Configuration Settings; Please Wait" will then be displayed. Wait until 'Ready to scan your job' message is displayed 8. If a fax-card is fitted, check that the fax screen appears when the fax tab is selected. If not, power the machine off/on. 9. Confirm the new software version by pressing the "Machine Status" hard key (the lowest blue button on the right hand side of the machine user interface screen), then selecting the "Machine Details" button. Check the System Software Version is now 2.98.50.000. The CopyCentre is now ready for use. For further information/troubleshooting please refer to Other Tips about Xerox multifunction devices are available at the following URL: Copyright (c) 2007 Xerox Ltd All Rights Reserved Rev.: 01 Author: Ed Wilson Date/Time: 1 Mar 07 09:22...

Download now

Please, enter two numbers from picture: