Login:
Votes - 5, Average rating: 3.8 ( )

User manual Datalogic Scanning, model DS8100A-3002

Manafacture: Datalogic Scanning
File size: 1.16 mb
File name: fc38560c-756e-4f78-a416-b7f405b2f2e5.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


(including startup current) Communication Interfaces Auxiliary Baud Rate RS232 1200 to 115200 Other Lonworks 1.25 Mb/s OPTICAL FEATURES Light Receiver Avalanche photodiode Safety Class 630 to 680 nm Wavelength Class 2-EN 60825-1; Class II-CDRH Laser Control Security system to turn laser off in case of motor slow down READING FEATURES Scan Rate . 1000 scans/s Max. Resolution Max. Read. Distance Max. Read. Width Max. Depth of Field (see reading diagrams) USER INTERFACE LCD Display 2 lines by 20 characters LCD Keypad 3 keys LED Indicators Power ON (green) Phase ON (yellow) Encoder (yellow) TX Data (green) Network (red) SOFTWARE FEATURES Operating Modes PackTrack™ Config. Mode Genius™ utility program Parameter Storage Non-volatile internal FLASH Readable Codes Interleaved 2/5 Code 39 standard Codabar Code 128 EAN 128 Code 93 (standard & full ASCII) EAN/UPC Code Selection Up to 10 codes during one reading phase ENVIRONMENTAL FEATURES Operating Temperature 0° to +50 °C (+32 to +122 °F) Storage Temperature 20° to +70 °C (-4° to +158 °F) Humidity -90% non condensing Vibration Resistance: EN 60068-2-6 14 mm @ 2 to 10 Hz; 1.5 mm @ 13 to 55 Hz 2 g @ 70 to 200 Hz; 2 hours on each axis Shock Resistance: EN 60068-2-27 30 g; 11 ms 3 shocks on each axis Protection Class EN 60529 IP65* PHYSICAL FEATURES Dimensions mm (inch) 217 x 173 x 127 (8.54 x 6.79 x 4.98) Weight 5 Kg (11 lbs.) * IP65 cables and connectors required (CAB-850x or BTK-8500). DS8100A-3002 QUICK GUIDE NAME Description Part Number PWO-480 Power and Connect System 480W 93ACC1767 FS-1 Frame Shaper (8 pcs) 93ACC1750 FBK-8100 Fast Bracket Kit (2 pcs) 93ACC1130 US-8100 Bracket Kit (10 pcs) 93ACC1140 GFC-80 90 Degree Mirror 93A251020 GFC-800 90 Degree Close Distance Mirror 93A201103 S30 Photocell Kit 93ACC1782 PH-1 Photocell Kit - PNP 93ACC1791 MEP-543 Photocell Kit - NPN 93ACC1728 OEK-2 Optical Encoder Kit (10 m cable + spring) 93ACC1770 OEK-1 Optical Encoder Kit + 10 m cable 93ACC1600 BTK-8100 Bus Terminator Kit (5 pcs) 93ACC1090 BTK-8500 IP65 Terminator Kit (2 pcs) 93A051286 PLL-8000 Optocoupled PLL device 93ACC1280 CAB-8100 10 wire shielded cable D 9.5 mm – 50 m 93ACC1120 CAB-8101 17-pin scanner/scanner connection cable 1.2 m 93A051020 CAB-8102 17-pin scanner/scanner connection cable 2.5 m 93A051030 CAB-8105 17-pin scanner/scanner connection cable 5 m 93A051040 CAB-8501 IP65 Cable Fam 8K 1,2 m 93A051283 CAB-8502 IP65 Cable Fam 8K 2,5 m 93A051284 CAB-8505 IP65 Cable Fam 8K 5 m 93A051285 Datalogic WebSentinel-005 Supervisor (up to 5 arrays) 93A101014 Datalogic WebSentinel-010 Supervisor (up to 10 arrays) 93A101015 Datalogic WebSentinel-020 Supervisor (up to 20 arrays) 93A101016 Datalogic WebSentinel-032 Supervisor (up to 32 arrays) 93A101017 Datalogic WebSentinel-064 Supervisor (up to 64 arrays) 93A101018 Datalogic WebSentinel-128 Supervisor (up to 128 arrays) 93A101019 Datalogic WebSentinel-256 Supervisor (up to 256 arrays) 93A101020 Electrical Connections: Two 17-pin connectors provide access to the scanner’s local Lonworks network used for both input and output connections to build a multi-sided or omni-station system. 17-pin Lonworks Connector Pinout Pin Name Function A1 GND Supply voltage (negative pin) A2 VS Supply voltage 20 to 30 Vdc (positive pin) 1 CHASSIS Cable shield A - internally connected by capacitor to chassis 2 n.c. Not connected 3 CHASSIS Cable shield B - internally connected by capacitor to chassis A1 A2 1 4 TXAUX Transmit data of auxiliary RS232 (referred to SGND) 15 Male -Input 5 SGND Signal ground (connected to GND) 6 7 RXAUX VS_I/O Receive data of auxiliary RS232 (referred to SGND) Supply voltage of I/O circuit A1 A21 15 8 Lon A+ Lonworks a line (positive pin) Female - Output 9 Lon A-Lonworks a line (negative pin) 10 Lon B+ Lonworks b line (positive pin) 11 Lon B-Lonworks b line (negative pin) 17-pin Local Lonworks Connectors 12 SYS_I/O System signal 13 SYS_ENC_I/O System signal 14 Reserved Internally connected 15 Ref_I/O Reference voltage of I/O circuit DS8100A-3002 QUICK GUIDE 5 Connectivity: DS8100A-3002 Typical Layout Conveyor SC6000 Extended I/O Host HUB ETHERNET SC6000 AUX CAB-SC6003 CAB-SC6013 Power/Net VAC INPUT CAB-SC6103 Cable PWO LONWORKS ENCODER PS PS Aux CAB-850x CAB-850x CAB-850x CAB-850x CAB-850x up to 3 scanners per branch BTK8500 Bus Return DX8200A-3002 DS8100A-3002 CAB-850x up to 4 scanners per branch BTK8500 Bus Return DX8200A-3002 DX8200A-3002 DS8100A-3002 DS8100A-3002 DS8100A-3002 CAB-850x DS8100A-3002 QUICK GUIDE 6 Example of Redundant System Layout AUX CAB-SC6103 Extended I/O ETHERNET SC6000 CAB-SC6003 CAB-SC6013 Power/Net VAC INPUT PWO LONWORKS ENCODER PS PS Aux CAB-850x CAB-850x CAB-850x CAB-850x CAB-850x BTK8500 Extended I/O ETHERNET SC6000 CAB-SC6003 CAB-SC6013 Power/Net VAC INPUT PWO CAB-PWO 03 Redundancy CAB-850x CAB-850x CAB-850x BTK8500 DX8200A-3002 ENCODER PS PS Aux LONWORKS Working Controller Protecting Controller to Host to Host DX8200A-3002 DX8200A-3002 DX8200A-3002 DS8100A-3002 DS8100A-3002 DS8100A-3002 ...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category