Login:
Votes - 3, Average rating: 4.7 ( )

User manual Snapper, model SLB514

Manafacture: Snapper
File size: 161.06 kb
File name: 153afda0-7242-abb4-a98c-009804bf7b4f.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


Do not put any objects like sticks or fingers in holes of impeller cover. 4. Stop the engine and disconnect the spark plug wire before attempting to clean obstructions or blockage from the intake or discharge passages. 5. Stop the engine and allow it to cool for at least two minutes before refilling the gas tank or before lifting leaf blower. 6. Do not put a vacuum kit of any kind on this machine. Foreign objects entering the impeller housing will destroy the impeller and may cause injury. Maintenance Instructions 1. Follow the service and maintenance instructions for the engine specified by the manufacturer. 2. If it becomes necessary to remove the impeller from the engine, disconnect the spark plug wire, remove the impeller cover, and remove the impeller retaining bolt (item 11) holding the impeller on the crankshaft. The impeller is now free to slide off the engine shaft. 3. When reassembling the impeller, install the square key (item 8), align the key way in the impeller hub and slide the impeller into place. With the impeller fully seated on the engine shaft, install the lockwasher and retaining bolt. 4. Bolt the impeller cover back in place. о о J LEAF BLOWER PARTS LIST MODEL SLB514 PART NUMBERS ITEM NO. SLB514 QTY. DESCRIPTION 1 703-0415 1 Engine 2 703-0410 1 Axla Assembly 3 703-0409 1 Lifting Handle 4 703-0401-RD 1 Housing Assembly 5 090-0066 2 5/16-18 x 3/4" HHCS 6 090-0408 4 5/16-24 x 3/4" HHCS 7 090-0392 4 5/16" Split Lockwasher 8 703-0424 1 1/4" x 1/4" x 2" Shaft Key 9 703-0430-2 1 Impeller Assembly 11 090-0433 1 3/8-24 x 1" Whizlock Screw 12 090-0418 6 5/16-18 Whizlock Nut 13 703-0021-A 1 Impeller Housing Cover 14 703-0414 1 Wheel Bracket 15 703-0419 1 Front Wheel 5 x 1.25 16 703-0024 1 Clevis Pin 1/2" DIA x 2" LG ■17 100-0015 1 3/32" Hair Cotter Pin 18 703-0420 1 Wheel Bracket Spacer 19 500-0012-P 2 Spacer 20 703-0108 2 Main Wheel 22 090-0457 2 Push Nut Cap 23 703-0413 1 Diverter 24 703-0425 1 Spring 25 090-0419 2 5/16-18 x 2 3/4" HHCS 26 090-0073 2 5/16-18x2 1/4" HHCS 27 703-0416 2 Upper Handle 28 090-0516 1 1/4-20 x 2 3/4" HHCS 29 090-0470 1 1/4-20 Nylock Nut 30 090-0090 2 5/16-18 x 1 1/2" HHCS 31 500-0051 2 Locking Knob 32 703-0422 1 Throttle Control 33 500-0041 2 Handle Grip 34 090-0048 6 5/16-18 Gripco Locknut 36 900-0074 2 Ty-Wrap 37 703-0417 1 Lower Handle 38 090-0067 1 5/16-18 x 5/8" HHCS...

Other models in this manual:
Blower systems - SLB514 (161.06 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category