Votes - 2, Average rating: 4 ( )

Manafacture: Husqvarna File size: 5.37 mb File name: Language of manual:

Flexible Hose 20. Pipes 21. Pad 22. Flat Nozzle (Option) 23. “EMISSION” Label .. DISPOSAL When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations. Frame: PE (Polyethylene) Harness: Chemical fiber Throttle lever: Metal, Plastic Volute case, Volute cover, Engine cover: PA66GF (Glass-reinforced nylon), Brass Pad: Chemical fiber Flexible hose: EVA (Ethylene vinyl acetate) Pipes: PP (Polypropylene) Fan: PA66GF (Glass-reinforced nylon) Element: Paper, Urethane * The insert nut of volute case, volute cover and fan can be taken off. 8 3 9 12 16 1 2 6 7 13 15 11 14 4 4 5 17 10 18 18 19 20 21 22 23 <370BTS> <370BFS> <370BTS/BFS> What is what? English 12 1. Frame 2. Harness 3. Spark Plug Cap 4. Throttle Lever 5. Stop Switch (behind) 6. Net 7. Choke Lever 8. Air Cleaner 9. Volute Case, Cover 10. “CAUTION” Label 11. Elbow 12. Fuel Tank 13. Recoil Starter 14. Stop Switch with Throttle Position Setting 15. Engine Cover 16. Handle Bar (Option) (380 BTS only) 17. Fan 18. Shock Absorber (Rubber) 19. Flexible Hose 20. Pipes 21. Pad 22. Flat Nozzle (Option) 23. “EMISSION” Label .. DISPOSAL When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations. Frame: ABS Harness: Chemical fiber Throttle lever: Metal, Plastic Volute case, Volute cover, Engine cover: PA66GF (Glass-reinforced nylon), Brass Pad: Chemical fiber Flexible hose: EVA (Ethylene vinyl acetate) Pipes: EVA (Ethylene vinyl acetate) Fan: PA66GF (Glass-reinforced nylon) Element: Paper, Urethane * The insert nut of volute case, volute cover and fan can be taken off. 16 15 1 2 10 6 7 13 12 4 11 14 18 9 3 8 22 21 17 20 19 <380BTS> <380BFS> <380BTS/BFS> What is what? English Technical data MODEL 330BT 350BT 350BF 370BTS 370BFS 380BTS 380BFS Dimensions (L x W x H) mm (in) 295x387x432 (11.6x15.2x17) 351x446x479 (13.8x17.6x18) 351x487x479 (13.8x19.2x18) 365x464x485 (14x18x19) 365x496x485 (14x20x19) 410x509x497 (16.1x20x19.6) 410x550x497 (16.1x21.7x19.6) Dry Weight kg (lbs) (including pipe) 6.75 (14.9) 10.2 (22.5) 10.4 (22.9) 12 (26.5) 12.2 (26.9) 13.2 (29.1) 13.4 (29.5) Dry Weight kg (lbs) (without accessories) 6.1 (13.4) 9.5 (20.9) 11.2 (24.7) 12.4 (27.3) Fuel Tank Capacity liter (fl. oz) 0.9 (30.4) 1.25 (42.3) 1.75 (60.0) 2.13 (72.0) Engine Type Air cooled 2-cycle gasoline engine Piston Displacement cu. cm (cu. in) 29.5 (1.8) 50.2 (3.1) 64.9 (4.0) 71.9 (4.4) Air Filter Single stage filter Single stage filter (half wet) 2-stage fresh flow filter system Carburetor (Diaphragm) valve type Rotary Ignition System CDI Digital Ignition Spark Plug NGK CMR7H Muffler Spark arrester equipped Idle speed rpm 3000 2200 2000 Operating Engine Speed rpm 3000 to 6700 2200 to 6100 2000 to 6900 2000 to 6700 Fuel Consumptionliter/h (fl. oz/h) 0.58 (19.6) 1.04 (35.2) 1.6 (54.1) 1.85 (62.6) Average Air Volume (w/stdPipe) cu. m/min (cf/m) 10.2 (360) 14 (494) 16 (565) 19.4 (685) Average Air Volume (@ housing) cu. m/min (cf/m) 12.2 (431) 19.6 (692) 21.0 (742) 25.9 (915) Air velocity m/sec (mph) (Maximum) 65 (145) 80 (180) 88 (198) 90 (201) Noise Level (50 Feet ANSIB175.2-2000) dB(A) 69 71 76 77 Sound power level EC directive 2000/14/ EC, measured dB (A) 102 104 110 109 Sound power level EC directive 2000/14/ EC, guaranteed dB (A) 102 104 110 Noise pressure level atthe operator’s ear (LpAeq) prEN15503 (ISO7917) dB (A) 90 94 95 (ISO7917) 100 Vibration level at idle, right handle prEN15503 (ISO7916) m/s2 1.9 2.9 2.3 0.8 (ISO7916) 1.4 (ISO7916) 2.2 2.6 Vibration level at max, speed, right handle prEN15503 (ISO7916) m/s2 2.6 2.1 2.5 3.9 (ISO7916) 4.3 (ISO7916) 3.5 4.5 • The data shown above are those in the case of one straight pipe. • Specifications are subject to change without notice. English 14 .. SWIVEL JOINT 1. Connect the blower and swivel joint with flexible hose. Clamp both ends of the flexible hose securely with the hardware supplied with the unit. NOTE A light lubricant may be used to ease assembly of flexible hose to blower elbow. .. THROTTLE LEVER [330BT/350BT/370BTS/380BTS] 1. Set up the throttle holder to the swivel and tighten the screw on the holder. When setting up the holder, please make sure to match the holder to the convex on the swivel joint as shown in F2. 2. Adjust the position and angle to achieve a comfortable working position, and tighten the throttle lever. (1) Cable (2) Hose .. THROTTLE CABLE [330BT/350BT/370BTS/380BTS] [330BT] • Fasten the throttle cable at central position of the hose by the band attached to the throttle cable. First, wrap the hose with the band fixed to the throttle cable from the lower side. Then, pass the band through a hole of the band as shown in figure. Please note that there is a possibility of damaging the hose if the band is fastened too tightly. [350BT] [370BTS] [380BTS] • Use the clamp to fasten the colgate tube containing the throttle cable and the power cable to the hose. (1) Clamp .. RIGHT HANDLE [350BF/370BFS/380BFS] • Insert the handle holder to the swivel and tig...

Download now

Please, enter two numbers from picture: