Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
Always use eye protection which is marked to comply with ANSI Z87.1. SAVE THESE INSTRUCTIONS FEATURES PRODUCT SPECIFICATIONS Weight ........................................................................ 5 lbs. Motor..................................................................18 Volt Dc Air Velocity: MPH........................................................................... 120 KNOW YOUR BLOWER See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. BLOWER TUBE The blower tube can be installed on the blower without using any tools. ASSEMBLY UNPACKING This product requires assembly. • carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: This new product has been shipped in a partially as- sembled condition as described below. carefully check the packing list below to ensure all items are included in the package; the packing list describes all loose items that are not assembled to the product as shipped. Do not operate the product if any packing list items are already assembled to your product when you unpack it. call the customer service number below for assistance. Operation of a product that may have been improperly preassembled could result in serious personal injury. 6 — English ASSEMBLY • Inspect the product carefully to make sure no breakage or damage occurred during shipping. • Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. • If any parts are damaged or missing, please call 1-800-860-4050 for assistance. PACKING LIST Blower Blower Tube Battery Pack charger Operator’s Manual WARNING: Do not attempt to modify this product or create accessories not recommended for use with this blower. Any such altera- tion or modification is misuse and could result in a hazard- ous condition leading to possible serious personal injury. WARNING: To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts. ASSEMBLING THE BLOWER TUBE WARNING: If any parts are damaged or missing do not operate this tool until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury. See Figure 2. • With the logo area facing up, slide the blower tube over the outlet on the blower housing. • Press down on the tab on the blower housing outlet. • Push tab on outlet on the blower housing down until it locks into place through the opening in the blower tube. OPERATION WARNING: Do not allow familiarity with products to make you care- less. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. Do not use any attachments or accessories not recom- mended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. APPLICATIONS You may use this product for the purposes listed below: . clearing hard surfaces such as driveways and walkways . Keeping decks and driveways free from leaves and pine needles This product will accept Ryobi One+ 18 V lithium-ion battery packs and Ryobi One+ 18 V nickel-cadmium battery packs. For complete charging instructions, refer to the Operator’s Manuals for your Ryobi One+ battery pack and charger models. STARTING/STOPPING THE BLOWER See Figure 3. • To start the blower, place the power switch in the ON (l) position. • To stop the blower, place the power switch in the OFF (O) position. TO INSTALL / REMOVE BATTERY PACK WARNING: Blower is intended for household use only. See Figure 4. WARNING: Always remove battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. 7 — English OPERATION OPERATION To install: • Place the power switch in the OFF (O) position. • Place the battery pack in the blower. Align raised rib on battery pack with groove in the blower’s battery port. . • Make sure the latches on each side of the battery pack snap in place and that battery pack is secured in the blower before beginning operation. CAUTION: When placing battery pack in the blower, be sure raised rib on battery pack aligns with the back of the blower and latches into place properly. Improper installation of the battery pack can cause damage to internal components. To remove: • Place the power switch in the OFF (O) position. .Locate latches on side of battery pack and depress both s...