Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
n For Windows Me users, check the radio button to the left of “Automatic search for a better driver (Recommended)” and click [Next]. The system automatically starts searching and installing the driver. Proceed to Step 8. If the system does not detect the driver, select “Specify the location of the driver (Advanced)” and specify the CD-ROM drive’s root directory (e.g., D:\) to install the driver. Windows 98 Windows Me 4. Click [Next]. The window below enables you to select the search method. 5. Check the radio button to the left of “Search for the best driver for your device. (Recommended).” Click [Next]. The window below enables you to select a location in which to install the driver. 4 6. Check the “CD-ROM drive” box and uncheck all other items. Click [Next]. n The system may ask you to insert a Windows CD-ROM while it checks for the driver. Specify the USBdrv_ directory of the CDROM drive (such as D:\USBdrv_\) and continue the installation. n When using the Windows 98, specify the USBdrv_ directory of the CD-ROM drive (such as D:\USBdrv_\) and continue the installation. 7. When the system detects the driver on the CD-ROM and is ready for installation, it displays the following screen. Make sure that the “YAMAHA USB MIDI Driver” is listed, and click [Next]. The system starts the installation. 8. When the installation is complete, the following screen appears. Click [Finish]. n Some computers may take about ten seconds to show this screen after the installation is complete. The driver has been installed. . Installing the driver on a Windows 2000 system 1. Start the computer and use the “Administrator” account to log into Windows 2000. 2. Select [My Computer | Control Panel | System | Hardware | Driver Signing | File Signature Verification], and check the radio button to the left of “Ignore -Install all files, regardless of file signature” and click [OK]. 3. Insert the included CD-ROM into the CD-ROM drive. 4. Make sure the STANDBY/ON switch on the S08 is set to STANDBY (off) and use the USB cable to connect the USB terminal of the computer (or the USB hub) to the USB terminal of the S08. When the S08 is turned on, the computer automatically displays the “Found New Hardware Wizard.” Click [Next]. 5. Check the radio button to the left of “Search for a suitable driver for my device. (Recommended).” Click [Next]. The window that appears enables you to select a location in which to install the driver. 6. Check the “CD-ROM drives” box and uncheck all other items. Click [Next]. n The system may ask you to insert a Windows CD-ROM while it checks for the driver. Specify the “USBdrv2k_” directory of the CD-ROM drive (such as D:\USBdrv2k_\) and continue the installation. 7. When the installation is complete, the system displays “Completing the Found New Hardware Wizard.” Click [Finish]. n Some computers may take about ten seconds to show this screen after the installation is complete. 8. Restart the computer. The driver has been installed. . Installing the driver on a Windows XP system 1. Start the computer. 2. Select [Start | Control Panel ]. If the Category View is selected, click “Switch to Classic View” at the left of the window. All control panel items (icons) will be displayed. 3. [System | Hardware | Driver Signing | Driver Signing Option ], and check the radio button to the left of “Ignore -Install the software anyway and don’t ask for my approval” and click [OK]. 4. Click [OK] to close the “System Properties” window, then click the “x” button at the top right of the window to close the control panel. 5. Insert the included CD-ROM into the CD-ROM drive. 6. Make sure the STANDBY/ON switch on the S08 is set to STANDBY (off) and use the USB cable to connect the USB terminal of the computer (or the USB hub) to the USB terminal of the S08. When the S08 is turned on, the computer automatically displays the “Found New Hardware Wizard.” 7. Check the radio button to the left of “Search for a suitable driver for my device. (Recommended).” Click [Next].The system starts the installation. 8. When the installation is complete, the system displays “Completing the Found New Hardware Wizard.” Click [Finish]. n Some computers may take about ten seconds to show this screen after the installation is complete. 9. Restart the computer. The driver has been installed. English 5 English English Card Filer allows you to store the data of the S08 on your PC. 1. Double-click on the “Card_” folder. Various files like “Setup.exe” will be displayed. 2. Double-click on the “Setup.exe.” YAMAHA Card Filer Setup Dialog box will be displayed. 3. Execute the installation by following the directions appearing on the screen. After completing the installation procedure, you will find the YAMAHA folder on your PC (Program Files as the default) and Card Filer folder in the YAMAHA folder. Refer to the “Card Filer Manual” in the Card Filer folder how to use the application. SQ01 In addition to sequencer function, SQ01 can be used as convenient voice ed...