Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
(The appropriate note off number is supplied with “All Note Off ” transmission). • When a voice bank MSB/LSB is received, the number is stored in the internal buffer regardless of the received order, then the stored value is used to select the appropriate voice when a program change message is received. •Poly mode is always active. This mode will not change when the instrument receives MONO/POLY mode message. Apendice Manual de instrucciones del CP33 51 Formato de datos MIDI Formato de datos MIDI ) 00H, LLH (data length) 43H, 4CH, 20H, 20H (CL) 43H, 4CH, 50H, 27H, 30H, 35H (CLP05) 3xH, 3yH (version x.y) [PANEL DATA] [CHECK SUM (1byte)] = 0-(43H+4CH+20H+......+Data end) 4. PROGRAM CHANGE Data format: [CnH] -> [ppH] CnH = Program event (n = channel number) ppH = Program change number P.C.#=Program Change number VoiceName MSB LSB P.C.# GRAND PIANO 1 0 122 1 Variation 0 123 1 GRAND PIANO 2 0 112 1 Variation 0 112 2 MONO PIANO 0 123 2 Variation 0 114 2 E.PIANO 1 0 122 5 Variation 0 123 5 E.PIANO 2 0 122 6 Variation 0 122 89 E.CLAVICHORD 0 122 8 Variation 0 123 8 VIBRAPHONE 0 122 12 Variation 0 122 13 CHURCH ORGAN 0 123 20 Variation 0 122 20 JAZZ ORGAN 0 122 17 Variation 0 123 17 HARPSICHORD 0 122 7 Variation 0 123 7 STRINGS/CHOIR 0 122 49 Variation 0 122 53 GUITAR 0 122 25 Variation 0 122 26 WOOD BASS 0 122 33 Variation 0 124 33 E.BASS 0 122 34 Variation 0 122 36 • Some devices use a “0 to 127” numbering system for program change messages. Since the CP33 uses a “1 to 128” numbering system, you will need to subtract 1 from the transmitted program change numbers to select the appropriate sound: e.g. to select P.C.#1 in the list above, transmit program change number 0. 5. PITCH BEND CHANGE [EnH] -> [ccH] -> [ddH] ccH = LSB ddH = MSB 6. CHANNEL AFTER TOUCH [Dnh]->[vvH] 7. SYSTEM REALTIME MESSAGES [rrH] F8H: Timing clock FEH: Active sensing Data Transmission Reception F8H Transmitted every 96 clocks Received as 96-clock tempo timing when MIDI clock is set to External. FEH Transmitted every 200 milliseconds If a signal is not received via MIDI for more than 400 milliseconds, the same processing will take place for All Sound Off, All Notes Off and Reset All Controllers as when those signals are received. • Caution: If an error occurs during MIDI reception, the Sustain, Sostenuto, and Soft effects for all channels are turned off and an All Note Off message occurs. 8. SYSTEM EXCLUSIVE MESSAGES (Yamaha MIDI Format) Panel Data Transmit Data format: [F0H] -> [43H] -> [0nH] -> [7CH] -> ... -> [F7H] F7H (End of Exclusive) • Panel Data Contents (1) 1’st Voice (2) Dual On/Off (3) Dual Voice (4) Dual Balance (5) Dual Detune (6) Dual Voice1 Octave (7) Dual Voice2 Octave (8) Dual Voice1 Effect Depth (9) Dual Voice2 Effect Depth (10) Split On/Off (11) Split Voice (12) Split Point (13) Split Balance (14) Split Voice1 Octave (15) Split Voice2 Octave (16) Split Voice1 Effect Depth (17) Split Voice2 Effect Depth (18) Split Sustain Mode (19) Reverb Type 1 (20) Reverb Type 2 (21) Reverb Depth 1 (22) Reverb Depth 2 (23) Effect Type 1 (24) Effect Type 2 (25) Effect Depth (26) — (27) Touch Sensitivity (28) Fixed Data (29) AUX Pedal (30) Soft Pedal Depth (31) Absolute tempo low byte (32) Absolute tempo high byte (33) Key-Off Sampling Depth (34) — (35) — (36) Variation •Panel data send requests cannot be received. 9. SYSTEM EXCLUSIVE MESSAGES (Universal System Exclusive) (1) Universal Realtime Message Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] -> [llH] -> [mmH] -> [F7H] MIDI Master Volume • Simultaneously changes the volume of all channels. • When a MIDI master volume message is received, the volume only has affect on the MIDI receive channel, not the panel master volume. F0H = Exclusive status 7FH = Universal Realtime 7FH = ID of target device 04H = Sub-ID #1=Device Control Message 01H = Sub-ID #2=Master Volume llH = Volume LSB mmH = Volume MSB F7H = End of Exclusive or F0H = Exclusive status 7FH = Universal Realtime XnH = When n is received n=0~F, whichever is received. X = irrelevant 04H = Sub-ID #1=Device Control Message 01H = Sub-ID #2=Master Volume llH = Volume LSB mmH = Volume MSB F7H = End of Exclusive (2) Universal Non-Realtime Message (GM On) General MIDI Mode On Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] -> [F7H] F0H = Exclusive status 7EH = Universal Non-Realtime 7FH = ID of target device 09H = Sub-ID #1=General MIDI Message 01H = Sub-ID #2=General MIDI On F7H = End of Exclusive or F0H = Exclusive status 7EH = Universal Non-Realtime XnH = When received, n=0~F. X = irrelevant 09H = Sub-ID #1=General MIDI Message 01H = Sub-ID #2=General MIDI On F7H = End of Exclusive Apendice 52 Manual de instrucciones del CP33 Formato de datos MIDI Formato de datos MIDI 10. SYSTEM EXCLUSIVE MESSAGES (XG Standard) (1) XG Native Parameter Change Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] -> [mmH] -> [llH] -> [ddH] ->...-> [F7H] F0H = Exclusive status 43H = YAMAHA ID 1nH = When received, n=0~F. When transmitted, n=0...