Votes - 5, Average rating: 4.2 ( )

Manafacture: Roland File size: 14.42 mb File name: Language of manual:

Now you can click the controller to open the Assign Message window. [Control Map] dropdown list Here’s where you select the number of the control map that you want to edit. For details, refer to “Receiving a Control Map from the A-PRO” (p. 31), and “Transmitting a Control Map to the A-PRO” (p. 31) . [Transmit], [Receive] Click [Transmit] to map to the existing content. [Receive] to load map from Message Assignment Window 1 2 3 4 6 5 8 7 1 2 * The items in the window will differ depending on the controller and on the type of message being assigned. Controller name This shows the name of the controller you’re editing. Assign Message selection list Here you can select the type of MIDI message to be assigned to the controller. Menu Explanation NO ASSIGN No MIDI message will be assigned Channel Message Channel messages (CC, note, etc.) System Realtime/F6 System realtime message or F6 (Tune Request) System Ex. System exclusive message of up to 24 bytes Free Message Any MIDI message of up to 24 bytes (multiple messages are allowed) Tempo Tempo control 24 Using A-PRO Editor 3 Using A-PRO Editor 3 7 Message assignment area Here you can specify the value of various parameters for the MIDI message you selected in the Assign Message selection list 2 . For details on the parameters of each MIDI message, refer to “Message Parameters” (p. 33) Output Port This specifies the USB port from which the MIDI messages will be transmitted to a USB- connected computer. Port Explanation Port 1 MIDI messages will be transmitted to “A-PRO 1.” Port 2 MIDI messages will be transmitted to “A-PRO 2.” Port 1+2 MIDI messages will be transmitted to both “A-PRO 1” and “A-PRO 2.” Button Mode If the controller is a button, this specifies the button mode. Mode Explanation Unlatch Turns on when you press the button; turns off when you release it. Latch Alternately turns on/off each time you press the button. Increase Each time you press the button, the value will be incremented by one ( or decremented by one if the maximum value is below the minimum value). When the value reaches the maximum value (minimum value), it will jump back to the minimum value (maximum value). * This cannot be selected if the message type is Note. Aftertouch mode (AFT Mode) If the controller you’re editing is [A1]–[you can specify the aftertouch setting. Name You can enter a name to describe the function you’ve assigned to the controller; this name is shown in the A-PRO’s display. Up to sixteen single-byte alphanumeric characters can be entered. The name you enter here is shown in the “PARAMETER” field of the HTML file exported by the [File] menu command [Export Assign List]. Virtual Center Click If the controller you’re editing is [R1]–[R9] or [S1]–[S9], you can make virtual center click settings ( p. 55) . This broadens the range in which the center value is transmitted. Mode Explanation OFF No insensitive range in the center ON Insensitive range in the center 4 5 6 8 Mode Explanation OFF No aftertouch Channel Pressure Transmitted as channel Polyphonic Key Pressure Transmitted as polyphonic key pressure messages. 25 Using A-PRO Editor 5 6 Using A-PRO Editor 5 6 Keyboard Set Window 6 7 1 2 3 4 5 8 What is a Keyboard Set? Keyboard-related settings such as the MIDI channel and split point for the UPPER and LOWER parts, and the octave settings, are collectively called a “keyboard set.” You can use A-PRO Editor to make keyboard set settings and store them to the [SPLIT]/[DUAL]/[LOWER] buttons. * Keyboard sets cannot be stored on your computer. 1 2 3 4 Octave shift Specifies the octave of the UPPER and LOWER parts. Transpose Specifies the transposition of the keyboard. MIDI Channel Specifies the MIDI channel of the UPPER and LOWER parts. Active Part Specifies the part(knob, BENDER, MODULATION, HOLD, or EXPRESSION 7 8 Keyboard range settings Specify the lower limit of the UPPER part and the upper limit of the LOWER part. [Transmit], [Receive] Click [Transmit] if you want to save a keyboard set on the A-PRO. Click [Receive] if you want to load a keyboard set from the A-PRO. Setting buttons Specify the button ([SPLIT]/[DUAL]/[LOWER] ) for which you are assigning a keyboard set. [Close] Closes the Keyboard Set window. 26 Using A-PRO Editor Menus Using A-PRO Editor Menus u Menu Explanation New Creates a new control map. The new control map will have no MIDI messages assigned to any of the controllers. Open Loads a control map that was saved in SMF format. For details, refer to “Loading a Control Map that was Saved on Your Computer” (p. 32). Save Saves the control map currently being edited by overwriting the SMF. Save As Saves the control map currently being edited in SMF format with the name you specify. For details, refer to “Loading a Control Map that was Saved on Your Computer” ( p. 32). Export Assign List Exports an HTML-format list of the messages assigned to each controller of the control map currently being edited. * The HTML file created by this command cannot be loaded ...

Download now

Please, enter two numbers from picture: