Votes - 0, Average rating: 0 ( )

Manafacture: Brother File size: 4.88 mb File name: Language of manual:

After reaching the end of the stitching, press e (“Reverse/Reinforcement Stitch” button) once. This step is not necessary if a stitch such as those for sewing buttonholes and bar tacks is selected where reinforcement stitches are automatically sewn. 1 a “Reverse/Reinforcement Stitch” button • After reverse/reinforcement stitches are sewn, the sewing machine stops. Memo ..Reverse/reinforcement stitches WILL NOT be sewn until (“Reverse/Reinforcement Stitch” button) is pressed. (“Start/Stop” button) may be pressed to stop stitching when needed such as for pivoting corners. — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Automatically cutting the thread The sewing machine can be set to automatically cut the threads at the end of the stitching. This is called “programmed thread-cutting”. If programmed thread- cutting is set, automatic reverse/reinforcement stitching is also set. This setting is convenient if a stitch for sewing buttonholes or bar tacks is selected. Turn on the sewing machine. a • The LCD comes on. b Select a stitch. • For details on selecting a stitch, refer to “Selecting stitching” (page 72). Press (Automatic thread cutting key). c • T turn off programmed thread-cutting, press .. (Automatic thread cutting key) and (Automatic reverse/reinforcement stitch y) light up, and the sewing machine is set omatic reverse/reinforcement stitching. r programmed thread-cutting and (Automatic thread cutting key) until the key is no longer lit. • When the sewing machine is turned off, the programmed thread-cutting setting is cancelled. d Position the fabric under the presser foot, and then press (“Start/Stop” button) once. 1 a “Start/Stop” button • After reverse/reinforcement stitches are sewn, the machine starts sewing. After reaching the end of the stitching, press e (“Reverse/Reinforcement Stitch” button) once. This step is not necessary if a stitch such as those for sewing buttonholes and bar tacks is selected where reinforcement stitches are automatically sewn. 1 a “Reverse/Reinforcement Stitch” button • After reverse/reinforcement stitches are sewn, the sewing machine stops and cuts the thread. The thread is cut here. Memo • Reverse/reinforcement stitches WILL NOT be sewn and the thread will not automatically be cut until (“Reverse/ Reinforcement Stitch” button) is pressed. (“Start/Stop” button) may be pressed to stop stitching when needed such as for pivoting corners. Useful Functions 63 SEWING BASICS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — SEWING BASICS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Saving stitch settings Adjusted thread tension and stitch width and length settings can be saved so that they will be specified each time the stitch is selected. The various settings can be saved for each utility stitch. Select the stitch, and then adjust the thread a tension and stitch width and length. To adjust the thread tension, press or (Thread tension keys). To adjust the stitch width, press or (Stitch width keys). To adjust the stitch length, press or (Stitch length keys). 3 1 2 a Thread tension keys b Stitch width keys c Stitch length keys 1 2 3 a b c Upper thread tension Stitch width (mm) Stitch length (mm) • For details on selecting a stitch, refer to “Selecting stitching” (page 72). • For details on changing the thread tension, refer to “Changing the tension of the upper thread” (page 58). • The thread tension and stitch width and length are changed. b Press (Manual memory key). • “Saving...” appears while the settings for the thread tension, stitch width and stitch length are being saved. • After the settings for the thread tension, stitch width and stitch length are saved, the initial stitch screen appears again. • The next time that the stitch is selected, the saved settings are the first ones that are displayed. • To clear the saved settings and return the thread tension and stitch width and length to their default settings, press (Reset key). To use the default settings the next time that the stitch is selected, press (Manual memory key) to save the settings. — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — Hands-free raising and lowering of the presser foot Using the knee lifter, you can raise and lower the presser foot with your knee, leaving both hands free to handle the fabric. ¦ Installing the knee lifter Turn off the sewing machine. a b Insert the knee lifter into its jack on the front of the sewing machine in the lower-right corner. Align the tabs on the knee lifter with the notches in the jack, and then insert the knee lifter as far as possible. 12 a Tabs b Notches Note • If the knee lifter is n...

Download now

Please, enter two numbers from picture: