Votes - 3, Average rating: 3.7 ( )

Manafacture: Bernina File size: 1.71 mb File name: 1134_white-2221-x.pdf Language of manual:

This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. WHITE SEWING MACHINE Record in space provided below the Serial No. and Model No. of this appliance. The Serial No. is located side of arm The Model No. is located side of arm. Serial No. Model No. 2221 Retain these numbers for future reference. PORTANT SAFETY INSTRUcTIONS When using an eiectncal appliance, followed, including the following: safety should always be Read all instructions before using (this appliance) DANGER —To reduce the risk of electric shock: — An should never be left when in. Always unplug this from the electric outlet immediately after using before cleaning. WARNING ——To reduce the risk of burns, fire, electric shock, or injury to persons: when this a toy. attention is Do not allow to be used 1. by or children. is in this manuaL Use only only for fts 2. in this manual. by a cord or plug, if it is not working ii it this 3. Never into water. Return the If It or or property, for examination, repair, to the or electrical or blocked, Keep ventilation open the with any air 4. Never sewing machine and foot controller free from the accumulation of lint, ings of dust, and loose cloth. 5. Never drop or insert any object into any outdoors. 6. Do not where aerosol (spray) or where oxygen is being 7. Do not are being remove plug from turn all controls to the off (“0”) position, 8. To outlet. the plug, not the cord. 9. Do not unplug by pulling on cord. To unplug, DANGER type rated 15 watts. bulb with Always unplug before relamping. 1. fallen into water. Unplug immediately. for an 2. Do not or store or pulled into tub or agik. fall it Do not 3. or drop into water or in liquid. Do not 4. WARNING 1. Keep fingers away from all moving parts. Special care is required around the sewingmachine needle. 2. Always use the proper needle, plate. The wrong plate can cause the needle to break. 3. Do not use bent needles. 4. Do not pull or push fabric while stitching. It may deflect the needle causing it to break. 5. Switch the sewing machine off ( ‘0”) when making any adjustments in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, etc. 6. Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual. 7. Never operate on a soft surface such as a bed or couch where the air openings may be blocked. • SAVE THESE INSTRUCTIONS 1. NAME AND FUNCTION OF PARTS 3 4-10 2. ACCESSORIES 3. BEFORE SEWING A. Converting machine 4 Connecting Foot Controller and Power Cord 5 B. 5 C. Changing Needle 6 D. Changing Foot 7 E. Winding Bobbin F. Lower Threading 8 G. Upper Threading 9 H. Drawing up Lower Thread 10 11-12 4. FUNCTION OF DEVICE 11 11 A. Pattern Selector B. Zigzag Width Dial C. Stitch length Dial 11 11 D. Adjuster 2. Sewing Button 11 F. Needle Position Control 12 G. Drop Feed Lever 12 H. Foot Regulator 12 I. Double Foot Lifter 12 13 5. PATTERN SETTING 6. FABRIC, THREAD AND NEEDLE TABLE 14 15 7. STRAIGHT SEWING A. Trial Sewin 15 B. Thread Tension Adjustment 16 17 8. ZIGZAG SEWING 18 9. ELASTIC SEWING 10. MAKING BUTTONHOLES 19-21 22 11. OVERCASTING 12. STRETCH STITCHING 23 24 13. OVERLOCKING 14. BLIND HEM STITCHING 25 15. MENDING 26 16. ZIPPER SEWING 27 17. ROLL HEMMING 28 18. ATTACHING ELASTIC 29 19. LAPPED SEAM SEWING 30 20. QUILTING 30 21. APPLIQUE WORK 31 22. EMBROIDERY 32 23. TWIN NEEDLE SEWING 33 24. PIN TUCKING 34 25. MAINTENANCE 35-33 A. Cleaning Feed Dog And Hook 35-36 B. Oiling Under Top Cover And Face Cover 37 C. Changing Light Bulb 38 26. TROUBLE CHART 39-40 N / —A r\) - •1 -A 0) 01 C.) AME AND FUNCTION OF PARTS hread Guide: To guide thread for bobbin winding. p Thread Guide: ro lead upper thread. ke-Up Lever: Safety-designed take-up lever for easier threading. Thread to be led from right to left. Thz cad Guide: To lead upper thread from right to left. Needle-Bar Thread Guide: To lead upper thread into the left guide for regular sewing. dresser Foot Thumb Screw: To fasten presser foot holder. Needle Plate: For smooth feeding to aid sewing, also marked for seam guides. Plastic Plate: You can see the quantity of lower thread. Drop Feed Lever: To lower feed dog for darning and embroidering, etc. Extension Table With Accessory Box: To convert the machine style into flat-bed use. To store the accessories. 11. Spool Pin (Retractable): To mount spool of thread. Retracts when not in use. To sew with twin needles. 12. Pattern Selector: To select the stitch pattern, turns both ways. 13. Zigzag Width Dial: To adjust zigzag width. 14. Stitch Length Dial: To adjust stitch length. 15. Reverse Button: To be pushed for reverse sewing, hold in for continuous reverse sewing. 16. Adjuster: To adjust buttonhole stitches balance and s...

Download now

Please, enter two numbers from picture: