We have made many improvements in our commercial shredder since its introduction in 1982. We are confident that it offers you the greatest value for your money in its product category today. We hope it meets – or even exceeds – your expectations. To ensure years of safe, efficient use, please read these few pages about your new shredder. If this manual doesn’t answer all your questions or if you wish to comment on this product, we welcome your call or letter. Sincerely, James Fellowes Chairman &

To ensure sufficient ventilation of the shredder a minimum distance of 4" (10 cm) to the wall or to the furniture must be maintained. 6. Caution Never insert hand, fingers or any foreign objects into the feed opening. Serious injury may result. Keep all loose articles of clothing, ties, jewelery, long hair or other loose objects away from feed opening. Injury may result. Always turn off and unplug the machine before moving, servicing, cleaning or any other conduct other than normal operation. Se

Also, make sure that the total of all products plugged into the wall outlet does not exceed 15 amps. 11. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous live parts or other risks. 12. Unplug this product and refer servicing to qualified personnel under the following conditions: A) When the power cord or plug is damaged or frayed. B) If liquid has been spilled on the product. C) If the product has been exposed to rain. D) If the product d

11.Do not attempt to service this product yourself, as opening or removing covers may exposeyou to dangerous live parts or other risks. 12.Unplug this product and refer servicing toqualified personnel under the followingconditions: A)When the power cord or plug is damaged orfrayed. B)If liquid has been spilled on the product. C)If the product has been exposed to rain. D)If the product does not operate normally whenthe operating instructions are followed. E)If the product has been dropped or the

15. Do not use flammable synthetic oil, petroleumbased products, or aerosols of any kind on or near shredder at any time. 2. Parts Identification 2 3 1 5 6 Fellowes Manufacturing Co. 1789 Norwood Avenue Itasca, IL 60143 USA Model: Serial #: Voltage: Motor: Current: Manufactured: R R 4 7 8 ON POWERSHRED 320 POWERSHRED 380 ON 7 8 9 2 4 3 5 Fellowes Manufacturing Co. 1789 Norwood Avenue Itasca, IL 60143 USA Model: Serial #: Voltage: Motor: Current: Manufactured: R R 6 1. LED display 5. Caution labe

Adjust knife guard to sit close to the knife and tighten screws. Operation This model is equipped with hand clamp (#3) which holds paper when cutting. Models IDEAL 2035 and 1036 are fitted with an automatic clamp, which goes up and down with the movement of the knife.

In the tests, the agencies also varied the available voltage 10% below and 6% above its normal range, stopping shredding only to empty the basket. IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING While setting up shredder • Check shredder for damage or defects; some paper particles in the basket are normal due to product testing and does not indicate a defect. • If the cord is damaged do not replace cord or use the machine. Return machine for a replacement. • Avoid touching expos

The cover over the inlet will ordinarily prevent this false indication from occurring. If the shredder is in a position where sunlight or a strong lamp shines on the front of the shredder from such a low position that the light reaches down into the inlet: • Move the shredder or the light to a different position, OR • Turn the rocker switch to the off position when not in use. CAUTION: Do not insert aerosol cleaners or lubricants into or around the machine. Some agents may combust, causing serio

-Press the oilpump button 3 x. -After lubrication let the machine run several times backwards and forwards alternately. -If tank (8) is empty refill with oil. Type of oil: cutting head oil 3.6 Replacing the plastic bag (IDEAL 4107) Replace bag when “bag full“ indicator lights. -Open the door (9). -Pull out the plastic bag holding the bottom of the bag. -Push down the waste paper. -Pull out the waste bag with frame (10) until it stops. -Remove the round belt (11) from the waste bag frame. -Tie th

2 secs. ..Piston reverses for a short distance. Danger! Do not reach under the cover sheet (11). ..Danger of getting cut! -Stand upon the bale ejecting guard (12). -Slide new plastic bag (13) over the bale hopper. -Swing in clamps (8) and (9) and secure on tension rod (7). -Press ball knob (10) for approx. 2 secs. ..Piston reverses for a short distance. -Swing up bale ejecting guard (4). 12 1-800-658-8788 -13 Close bale - Push up locking bush (5) and swing down locking mechanism (4). - Slightly