Votes - 3, Average rating: 4
(
)
)
|
manual abstract
Repeat this procedure until the blade cuts correctly. Hold the screw in place and retighten the locking nut. If your trimmer is pushing or bulging paper back from the edge of the trimmer, follow the previous procedure, except turn the screw clockwise, test cut, and repeat in necessary. b. If neither of the previous procedures realigns the blade, loosen the locking nut on the screw and turn the screw 2-3 full turns clockwise. Now turn the screw in 1/8” to 1 / 4” turn increments and test cut until the blade will cut through its entire length. 2 3...
Other models in this manual:Paper Shredders - Paper Trimmer 715 (37.53 kb)
Paper Shredders - Paper Trimmer 724 (37.53 kb)
Paper Shredders - Paper Trimmer W18 (37.53 kb)
Paper Shredders - Paper Trimmer W24 (37.53 kb)