Votes - 5, Average rating: 3.8 ( )

Manafacture: Fellowes File size: 78.5 kb File name: 3fe7b83c-14cb-4269-9eb1-55f2db49161a.pdf Language of manual:

7. Operation Read operating instructions before operating the shredder. Insert plug in power outlet. To avoid motor overload, the paper shredders may cut out automatically after approx. 20 minutes of continuous operation. Switching equipment ON 1 – Press rocker switch to pos. (1) • Controller switch locks in "on" position. • Equipment is ready for operation (standby). – Feed paper • The shredding process is started by automatic start stop control in the paper feed opening. Insert paper and shredding begins automatically. • When the shredding is complete, the cutting system automatically stops after approx. 3 seconds. Switching equipment OFF – Press rocker switch to pos. (3) • switch resets to center position and 3 stops the cutting system. 1.598.999.100 Edition 11/00 USA Paper shredder 120 CC 8. Checklist for Inoperative Machine If the equipment does not work properly, please check the following points first: – Is the plug inserted ? – Is the switch turned on ? – Is waste container pushed in properly ? – Is waste container full ? Empty container – Is there a paper jam in the shredder ? See Malfunctions – Is the motor overheated ? Switch machine off and allow motor to cool down for approximately 15–20 min. If none of the above applies and the equipment still does not run, please contact the appropriate customer service department. 9. Malfunctions Paper jam • Press rocker switch to center position 2 (2) to stop the cutting system. • Press and hold down rocker switch in 3 pos. (3) to reverse the cutting system and back out jammed material (paper is pushed out) Caution! 1 Do notpress rocker switch alternately 3 forwards/backwards in pos. (1 and 3) • Remove excess paper. 1 • Return switch to pos. (1) and continue shredding in smaller quantities so as not to jam the machine further. Door contact interrupted – Paper shredder switches off automatically. Press rocker switch to center (2) 2 position. • Check whether cut material container is properly pushed into bottom frame. 1 • Return switch to "on" position (1) and continue shredding. Cut material container full – Paper shredder switches off automatically. 2 • Press rocker switch to center (2) position. • Empty cut material container or exchange cut material bag. 1 • Return switch to "on" position (1) and continue shredding. 10. Maintenance (Cross cut unit only) – When tearing capacity drops or the noise increases: • Spray special cutting block oil onto cutting system. 1 • Run cutting system forward (1) and backward (3) several times without 3 feeding paper. • Continue shredding. Edition 11/00 1.598.999.100 USA 120 CC Paper shredder 11. Warranty 12. Customer Service FELLOWES® POWERSHRED LIMITED United States WARRANTY Fellowes Manufacturing Co. 1789 Norwood Avenue 1 yearon all parts and labor Itasca, IL 60143 5 yearsparts and labor on cutting cylinders Tel.: 1-800-955-0959 Fellowes® warrants this product to be free from Canada defects in material and workmanship for a Fellowes Manufacturing of Canada Ltd. period of one year from the date of purchase by 2750 John Street the original consumer. At it's option, Fellowes® Markham, Ontario L3R 2W4 will repair or replace without charge for material Tel.: 1-800-665-4339 or labor, any component found to be defective during the warranty period. Additionally, the United Kingdom cutting cylinders are warranted for 5 years from Fellowes Manufacturing UK Ltd. the original purchase date and will be replaced Doncaster Road without charge for material or labor if found by Kirk Sandall Fellowes® to be defective. Doncaster, South Yorkshire DN3 1HT Tel.: 01302-885 331 Warranty Exclusions Australia The parties agree that the buyer's sole and Fellowes Manufacturing (Australia) Pty.Ltd. exclusive remedy against Fellowes® shall be for 10 Fellowes Court the repair or replacement of defective parts as Tullamarine, Victoria 3043 provided herein. The buyer agrees that no Tel.: (03) 9330-3211 in Melbourneother remedy (including, but not limited to, 1-800-331-177 outside Melbourne incidental or consequential damages for lost profits, lost sales, injury to property or any other Nederland incidental or consequential loss) shall be Fellowes available to him. This warranty shall NOT apply P.O. Box 180 and is void under the following circumstances: 4130 Ed Vianen 1. When this product or any part thereof has been Nederland subjected to accident, alteration, abuse, or Tel.: 0347-377988 misuse. 2. When the original Model and Serial Number Germany Plate has been altered, effaced or removed. Fellowes GmbH 3. When repair or service covered under this Dieselstra.e 27 warranty (other than routine maintenance D-30827 Garbsen (as described in the Owner's Manual) has been Tel.: 05131-49770 performed by personnel without the express written consent of Fellowes®. France 4. When the product has been used pursuant to Fellowes Lynx S.A. any verbal or written rental, lease or loan 194 allee de la Croix des Hormes agreement. 69250 Montanay Tel.: 33-72-08-25-50 THIS W...

Download now

Please, enter two numbers from picture: