tions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Unpacking When unpacking, check to make sure the following parts are included. 3-inch Bench Grinder1) 31-inch Flex Shaft2) Wrench3) 3-inch Grinder Stone4) 3-inch Fiber Wheel5) 1/8 inch Mounting Stone Bit6) If any parts are missing

Keep track of which orientation the old carbon brushes were in to prevent needless wear if they will be reinstalled. c. If either carbon brush is worn down by more than 1/2, replace both carbon brushes. d. To clean old carbon brushes before reusing them, rub the contact areas with a pencil eraser. e. Reinsert the old carbon brushes in the same orientation to reduce wear. f. When installing the carbon brushes, make sure the carbon portions of the carbon brushes contact the motor armature, and tha

Use personal protective equipb. ment. Always wear ANSI-approved safety eye protection and a dust- mask/respirator. Safety equipment such as non-skid safety shoes, a hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Do not allow children to use this c. Compact Belt Sander. This power tool is not a toy and should not be operated by any child, or untrained user, at any time. Severe abrasion hazard. d. Keep hands and fingers clear of moving sanding belts,

If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. List of contents Description Q’ty Angle Grinder 1 Grinding Wheel 1 Quick Release Wheel Guard 1 Auxiliary Handle 1 Pin Wrench 1 Owner’s Manual 1 Instructions for putting into use Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product. To prevent serio