Votes - 2, Average rating: 4
(
)
)
|
manual abstract
Observe all normal safety precautions related to avoiding electric shock. 1. Know your machine. Read this manual carefully. Learn the machine’s applications and limitations, as well as specific potential hazards peculiar to it. 2. Ground all machines. This machine is “Double Insulated,” meaning that all outside metal parts are insulated from electrical power. Double Insulated tools are equipped with a polarized plug. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not attempt to circumvent this safety feature. 1 3. Do not expose tool to moisture. Don’t use this machinery in damp or wet locations. Keep out of rain. 4. Keep work area clean. Cluttered areas invite injuries. 5. Keep children and pets away. All children should be kept away from the work area. Never let a child handle a tool without strict adult supervision. 6. Do not operate this tool if under the influence of alcohol or drugs or if you are tired. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to operate. 7. Use safety equipment. Eye protection should be worn at all times when operating this machine. Use ANSI approved safety glasses. Everyday eyeglasses only have impact resistance lenses. They are NOT safety glasses. Dust mask, respirator, non-skid safety shoes, hard hat, or hearing protection must be used in appropriate conditions. 8. Wear proper apparel. Loose clothing, gloves, neckties, rings, bracelets, or other jewelry may present a potential hazard when operating this machine. Please keep all apparel clear of the machine. 9. Don’t overreach. Keep proper footing and balance at all times when operating this product. 10. Always disconnect the machine from power source before servicing or changing accessories. 11. Check for damage. Check your tool regularly. If part of the tool is damaged it should be carefully inspected to make sure it can perform its intended function correctly. If in doubt, the part should be repaired. Refer all servicing to a qualified technician. Consult your dealer for advice. 12. Keep away from flammables. Do not attempt to operate this tool near flammables or combustibles. Failure to comply may cause serious injury or death. 13. Do not start tool while it is resting on materials. Always turn tool on BEFORE coming in contact with material surface. 14. Do not set tool down until it has come to a complete stop. 15. Always check to make sure that trigger is not engaged before plugging tool in. 16. Keep hands clear of cutting edges and all moving parts. 17. Protect others in work area from debris such as chips and sparks. Provide barriers and shields as needed. 18. Secure work. Use a clamp, vise or other practical means to hold your work securely, freeing both hands to control the tool. 19. Use the right tool for the job. Do not use a tool or attachment to do a job for which it was not intended. Do not alter a tool. 20. Use proper accessories. Using accessories not recommended may be hazardous. Be sure accessories are properly installed and maintained. Do not defeat a guard or other safety device when installing an accessory or attachment. 21. Remove all adjusting keys and wrenches. Make a habit of checking that adjusting keys, wrenches, etc. are removed from the tool before turning it on. 22. Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. Hold your tool by insulated, non-metal grasping surfaces. Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock hazards. 2 23. Avoid accidental starting. Be sure your tool is turned off before plugging it in. Do not use a tool if the power switch does not turn the tool on and off. Do not carry a plugged-in tool with your finger on the switch. 24. Do not force tool. Your tool will perform better at the rate for which it was designed. Excessive force only causes operator fatigue, increased wear and reduced control. 25. Do not abuse cord. Never carry your tool by its cord or unplug it by pulling the cord from the outlet. Pull the plug rather than the cord to reduce the risk of damage. Keep the cord away from heat, oil, sharp objects, cutting edges and moving parts. 26. Maintain tools carefully. Keep handles dry, clean and free from oil and grease. Follow instructions for lubricating and changing accessories. Periodically inspect tool cords and extension cords for damage. Refer all service to a qualified technician. 27. Store idle tools. When not in use, store your tool in a dry, secure place. Keep out of reach of children. 28. Never operate grinder without using a guard. GETTING STARTED Before operating your 4-1/2" Angle Grinder check the contents of the box to make sure you have everything you will need. Items included in the box: 1 Operating ...