Login:
Votes - 4, Average rating: 4.3 ( )

User manual Harbor Freight Tools, model 39797

Manafacture: Harbor Freight Tools
File size: 320.52 kb
File name:
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


If you feel any medical or physical symptoms related to vibration (such as tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. 2. Do not smoke during use. Nicotine reduces the blood supply to the hands and fingers, increasing the risk of vibration-related injury. 3. Wear suitable gloves to reduce the vibration effects on the user. 4. Use tools with the lowest vibration when there is a choice between different processes. 5. Include vibration-free periods each day of work. 6. Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work. 7. To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately. SAVE THESE INSTRUCTIONS. SPECIFICATIONS All Models Motor No Load Speed 3450 RPM Arbor Size 5/8” with 1/2” Adapter Base Size 5” x 7” Mounting Holes 2 x 3/8” Work Light Bulb 40 W Household type MODEL 37822 Electrical Input 120 V~ / 60 Hz / 1/2 HP Wheel Size 6” x 3/4” x 1/2” Work Light Bulb 40 W Household type MODEL 37823 Electrical Input 120 V~ / 60 Hz / 3/4 HP Wheel Size 8” x 3/4” x 5/8” Work Light Bulb 40 W Household type MODEL 39797 Electrical Input 120 V~ / 60 Hz / 1/2 HP Wheel Size 6” x 3/4” x 1/2” MODEL 39798 Electrical Input 120 V~ / 60 Hz / 3/4 HP Wheel Size 8” x 3/4” x 5/8” UNPACKING When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible. 180264 INSTRUCTIONS FOR PUTTING INTO USE Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the tool off and unplug it before assembling or making any adjustments to the tool. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Assembly 1. Installing Tool Rests - a. Turn the Grinder off and unplug it. b. FIGURE 1Install adjustable rests (22 and 35) to the wheel guards (7 and 27) as shown in Figure 1. Use bolts and washers to secure them in place as shown in Figure 1. Note: There is a left and a right tool rest. Refer to Figure 1 to be certain that you install them correctly. c. The tool rests should be adjusted to within 1/16” of the grinding wheel. To adjust this distance, move Adjustable Rests (22 and 35) by loosening bolts and moving them to the proper position. 2. Installing Spark Guards - a. FIGURE 2Select spark guards (17 and 18), washer and bolt. Install the right spark guard to the wheel guard as shown in Figure 2. b. Adjust the spark guard to within 1/16” of the grinding wheel. Repeat for left side. Note: There is a left and right spark guard. Refer to Figure 2 to be certain that you install them correctly. REV 01b 3. Installing Bracket to Eye Shield - a. FIGURE 3Select one flat bracket and one eye shield. Assemble as shown in Figure 3. b. Repeat for left eye shield. 4. Installing Eye Shield to Grinder - a. For installation of the right eye shield (19), make sure that the holes in the eye shield bracket face downward. b. FIGURE 4Push eye shield bracket onto mounting bracket until it locks into place as shown in Figure 4. c. Repeat for left eye shield. OPERATING INSTRUCTIONS Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Work Piece and Work Area Set Up 1. Designate a work area that is clean and well-lit. The work area must not allow access by children or pets to prevent distraction and injury. 2. Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage. 3. There must not be objects, such as utility lines, nearby that will present a hazard while working. General Operating Instructions TO PREVENT SERIOUS INJURY: DO NOT OPERATE WITH ANY GUARD DISABLED, DAMAGED, OR REMOVED. 1. Sharpening Scissors - If possible take the scissors apart to make the sharpening operation easier and safer. Remove material only from the outside surface and work from the heavy end of the blade toward the tip. 2. Sharpening Screwdrivers - The end of a properly sharpened screwdriver will be a perfect rectangle, absolutely flat and perpendicular to the center line of the shank. The two sides and two faces will taper outward from the edge of the shank of the screwdriver. They should be flat with intersecting faces perpendicular. Hold each face of the screwdriver against the wheel to true it up, then ease the end straight into the stone to grind it true. 3. Sharpening Knives - Remove metal from both faces of most knives, working from the heavy end of the blade toward the tip. 4. Sharpening Twist Drill Bits - Drill bits are best sharpened on a sharpening jig but some sharpening can b...

Other models in this manual:
Sanders - 37822 (320.52 kb)
Sanders - 37823 (320.52 kb)
Sanders - 39798 (320.52 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category