Votes - 0, Average rating: 0
(
)
)
|
Photos and specs BenQ PL550 |
Other manuals for this model:
manual abstract
Important safety instructions
3
displaying still images (like On-Screen Display menus, TV station logos, fixed/inactive
text or icons) for more than two hours. Change the aspect ratio from time to time. Fill
the entire screen with the image and eliminate the black bars whenever possible. Avoid
displaying images in 4:3 aspect ratio over a long period of time, otherwise there may be
visible burn marks on the screen as two vertical lines.
If display of a still image is required, it is recommended to enable Anti Image
Retention under the Setting and Advanced menu.
Notes on condensation
Condensation may form between the display's LCD panel and touch panel glass when
there is a dramatic change in the display's ambient temperature, such as when moving the
display from a cold room to a hot room, or heating the room from a low temperature.
This is a natural phenomenon and will not affect the normal operation of the display.
• If condensation occurs, turn on the display and leave it on for 2 hours. Prevent the
display from going into the standby mode by turing off the Power Save and Auto
Search functions under the Setting menu.
• To avoid condensation, wrap the display with a sealable plastic bag before moving it
from a cold place to a hot place, and wait for the display to adjust to the warmer
temperature before unwrapping it. When using or storing the display in a damp
environment, consider placing a dehumidifier or moisture absorbing agents (like silica
gel bags) near the display.
Battery safety notice
The use of the wrong type of batteries may cause chemical leaks or explosion. Please
note the following:
• Always ensure that the batteries are inserted with the positive and negative terminals in
the correct direction as shown in the battery compartment.
• Different types of batteries have different characteristics. Do not mix different types.
• Do not mix old and new batteries. Mixing old and new batteries will shorten battery life
or cause chemical leaks from the old batteries.
• When batteries fail to function, replace them immediately.
• Chemicals which leak from batteries may cause skin irritation. If any chemical matter
seeps out of the batteries, wipe it up immediately using a dry cloth, and replace the
batteries as soon as possible.
• Due to varying storage conditions, the battery life for the batteries included with your
product may be shortened. Replace them within 3 months or as soon as you can after
initial use.
• There may be local restrictions on the disposal or recycling of batteries. Consult your
local regulations or waste disposal provider.
Safety notice for remote control
• Do not put the remote control in the direct heat, humidity, and avoid fire.
• Do not drop the remote control.
• Do not expose the remote control to water or moisture. Failure to do so could result
in malfunction.
• Confirm there is no object between the remote control and the remote sensor of the
product.
• When the remote control will not be used for an extended period, remove the
batteries.
...