Votes - 0, Average rating: 0
(
)
)
|
manual abstract
You can use this diagram to connect your router or follow the detailed instructions in this booklet.
1. Extend the antennas.
6. Connect a computer.
Position the antennas for the best WiFi
You can use an Ethernet cable or connect
performance.
with WiFi.
NETGEAR recommends that you position
To connect with WiFi, use the WiFi network
all of the antennas vertically as shown.
name and password on the product label.
7. Log in to the router.
2. Prepare your modem.
Launch a web browser.
Unplug your modem’s power. If it has a
battery backup, remove the battery.
NETGEAR genie displays.
If you do not see genie, enter
3. Connect your modem.
www.routerlogin.net in the address field
of the web browser. When prompted, enter
Plug in your modem. Put the battery back
admin for the user name and password for
in. Then cable the modem to the yellow
the password.
Internet port on the router.
Follow the genie steps to connect to the
Ethernet cable
4. Check the router’s LED On/Off switch.
Internet.
If the LED On/Off switch on the rear panel
8. Get free apps.
of the router is in the off position, slide the
During the installation process, genie
LED On/Off switch to the on position.
prompts you to download two free apps:
5. Power on the router.
• genie app. A personal dashboard that
Internet
lets you monitor, control, and repair
The Power LED lights
Router
your home network.
amber and then turns
DSL or cable
white when the router
• ReadySHARE Vault app. Enables
is ready.
automatic continuous backup of a
Ethernet cable
Power
Windows computer to a USB device
adapter
that’s connected to your router.
Modem
9. Get the user manual.
You can get the user manual online at
http://downloadcenter.netgear.com or
through a link in the product’s user interface.
...