Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Join a Wireless Network
Check Your Connection Status
Support
You can join a wireless network from NETGEAR genie, or you can use Wi-Fi
When you install your adapter, the NETGEAR genie icon displays in the
Thank you for purchasing this NETGEAR product.
Protected Setup (WPS) if your wireless router supports it.
Windows system tray and on the desktop. You can double-click this icon
to open NETGEAR genie to make changes or connect to a different wireless
After installing your device, locate the serial number on the label of your
¾ To join a network using NETGEAR genie:
network. The color of the icon indicates the strength of your wireless
product and use it to register your product at https://my.netgear.com.
1. Insert the adapter into a USB port on your computer.
connection:
You must register your product before you can use NETGEAR telephone
2. Click the NETGEAR genie icon
that displays on the Windows
support. NETGEAR recommends registering your product through the NETGEAR
systems tray or on the desktop.
White. Strong connection
website.
The NETGEAR genie Home screen displays.
Yellow. Weak connection
3. Click the Join a Network button.
For product updates and web support, visit http://support.netgear.com.
4. Select your wireless network.
Red. No connection
NETGEAR recommends that you use only the official NETGEAR support
resources.
5. Click the Connect button.
If you remove your adapter, NETGEAR genie is not available, so the icon
6. If the network is secure, enter its password or network key.
does not display. When you insert the adapter again, the icon returns.
You can get the user manual online at http://downloadcenter.netgear.com or
The adapter joins the network, which can take a few minutes. Your
through a link in the product’s user interface.
settings are saved in a profile.
Added Range and Performance
For the complete EU Declaration of Conformity, visit
¾ To join a network using WPS:
http://support.netgear.com/app/answers/detail/a_id/11621/.
For added range and performance, you can flip the top portion of the
For regulatory compliance information, visit
1. Press and hold the WPS button on the adapter for two seconds.
adapter so that it is perpendicular to the adapter:
http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
WPS button
2. Within two minutes, press the WPS button on your wireless router or
In this position, the internal antennas are extended out from the adapter for
gateway.
increased WiFi performance.
The adapter joins the network, which can take a few minutes. Your
settings are saved in a profile.
NETGEAR, Inc.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
August 2014
350 East Plumeria Drive
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries.
San Jose, CA 95134, USA
Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.