Votes - 3, Average rating: 4.3 ( )

Manafacture: Allied International File size: 177.73 kb File name: 8700-family_ug_d_v273.pdf Language of manual:

All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn. Allied Telesyn International, Corp. reserves the right to make changes in specifications and other information contained in this document without prior written notice. The information provided herein is subject to change without notice. In no event shall Allied Telesyn be liable for any incidental, special, indirect, or consequential damages whatsoever, including but not limited to lost profits, arising out of or related to this manual or the information contained herein, even if Allied Telesyn has been advised of, known, or should have known, the possibility of such damages. All trademarks are the property of their respective owners. Quick Install Guide Documentation Roadmap Quick Install Guide Documentation Roadmap AT-8700XL Series AT-8700XL Series Safety and Statutory Information Booklet AT-8700XL Series User Guide AT-8700XL Series Software Reference General Customer Support Visit for the latest documentation, FAQs, and support information. AT-8700XL Series Quick Install Guide AT-8700XL Series Hardware Reference Uplink Module Uplink Module Quick Install Guide Uplink Module Hardware Reference Printed Acrobat PDF Website Models Covered By This Guide This Quick Install Guide includes information on the following models: ¦ AT-8724XL 24-port 10BASE-T/100BASE-TX Advanced Fast Ethernet Switch ¦ AT-8748XL 48-port 10BASE-T/100BASE-TX Advanced Fast Ethernet Switch Quick Install Guide updates can be downloaded from Package Contents The following items are included with each AT-8700XL Series switch. Contact your sales representative if any items are damaged or missing. ¦ One AT-8700XL Series switch. ¦ One AC power cord (AC models only). ¦ One serial cable for connecting the switch to a terminal or PC. ¦ One 19 inch rack-mount kit. ¦ One AT-8700XL Series Quick Install Guide. ¦ One Safety and Statutory Information booklet. ¦ One AT-8700XL Series Documentation and Tools CD-ROM (which includes the complete AT-8700XL Series Document Set and utilities). ¦ One warranty card. C613-04042-01 REV D AT-8700XL Series Switch AT-8700XL Series Switch e The switch can be installed in a standard 19-inch rack or on a level surface such as a desktop or bench. When installing the switch, choose a site that: ¦ Allows adequate airflow around the switch and its vents. ¦ Is free of dust and moisture. ¦ Will maintain an ambient temperature range of 0 to 40. C (32 to 104. F) and a humidity range of 5 to 95% non-condensing. ¦ Has a reliable and earthed (grounded) power supply circuit, preferably dedicated and filtered. ¦ Does not expose cabling to sources of electrical noise, such as radio transmitters, broadband amplifiers, power lines, electric motors, and fluorescent fixtures. ¦ Allows easy access to the switch’s power and cable connections. ¦ Will allow all related network devices to be connected to the switch without exceeding maximum cable length limitations. See the AT-8700XL Series Hardware Reference for cable length specifications. Installing the Switch All AC and DC versions of this equipment must be earthed. Follow these steps to install the switch: 1. Before installing the switch, read the safety information For safety information, see the Safety and Statutory Information booklet. A copy of this booklet is supplied with each switch, and can also be found on the Documentation and Tools CD-ROM or at 2. Gather the tools and equipment you will need If installing a DC version of the switch, you will need a DC power source, DC supply cable, and wire strippers (see step 9). If the switch is to be connected to a redundant power supply, you will need a redundant power supply unit and cable (see step 11). 3. Choose a suitable site for the switch Either a flat surface or 19 inch rack. 4. Unpack the switch Verify the package contents. If any items are damaged or missing, contact your sales representative. C613-04042-01 REV D Quick Install Guide Quick Install Guide Install uplink modules (optional) If you purchased uplink modules, install them now by following the instructions in the Uplink Module Quick Install Guide. 6. Place the switch in its operating location If installing the switch in a rack: • Remove the rubber feet. • Attach the rack-mounting brackets. • Mount the switch in the rack. 7. Check the supply voltage and the switch’s rated voltage AC versions of AT-8700XL Series switches are fitted with a universal main power supply that will function over the range 100–240 VAC and 50–60 Hz. DC versions of AT-8700XL Series switches require a supply voltage in the range 39–60V DC. The specific power supply requirements for a particular model are clearly displayed on the rear or underside of the switch. If the supply is outside the accepted range for the switch, the switch may not operate or damage to the switch may re...

Download now

Please, enter two numbers from picture: